Custom Resolution Utility (CRU)

[Michael Z Freeman]

(01-26-2022 06:01 PM)ToastyX Wrote:  

(01-26-2022 04:51 PM)Michael Z Freeman Wrote:  Doesn't seem to do anything. 3840 is still listed as "recommended" in display settings.

Then the only method I know is the one you said Windows gets messed up, but it shouldn't. What you described with the tiny UI and icons isn't a resolution issue. Check the Windows display settings and make sure the scaling is set correctly, and then log out and back in because sometimes scaling changes don't apply correctly until you do.

OK, at first I tried this using your later (revised) "SAM7017-4096x2160-Fixed.bin" EDID but it was still stuck at 3840. So I removed all detailed resolutions from first CRU GUI panel at the top. Then made the Detailed resolution "preferred" in DisplayID 1.3. Now the "Recommended Resolution" shows as 4096x2160. AMD Integer Scaling also works properly with 2048x1080 --> 4096x2160 with the more vibrant colour and dynamic range. The only problem being that everything is 'locked' to the 4096x2160 resolution. I can't get the display to change into any other resolution mode (even with AMD Integer Scaling & GPU scaling off) even if I add another detailed resolution in 1.3 display block. My display always shows "4096x2160" what ever resolution I put Windows into and a resolution such as 1600x900 is centered with black bars around it. But this is not too much of a problem at the moment. So thank you for the support !

I will look forward to a future version of CRU that can change the native resolution in the way you described.

BTW I wanted to donate but wanted to make a one off donation. Is that possible ?


  SAM7017-4096x2160-Fixed_1.bin (Size: 384 bytes / Downloads: 186)