Custom Resolution Utility (CRU)

[SPEED]

(02-07-2022 08:01 PM)ToastyX Wrote:  

(02-07-2022 06:57 PM)SPEED Wrote:  That's my only display, i just said 100 as a minimum, i would definitely like 120 as this are the specs of the tv.

I just realized 120 Hz has the same vertical blanking as 60 Hz, so that could be the issue. Have you tried DisplayID 1.3? What other changes did you make?

Just tried now, picture 3 and 4. I deleted the 4k at 120 hz from CTA-861 and manually added it in through displayid 1.3 and as can be seen in the pictures, now i don't have the option to chose it in windows settings. If i edit the tv resolution from CTA-861 i only have 2 options, resolution and refresh rate which even if it would work it would not fix my issues as from my knowledge i have to play around with blanking to fix max vram at idle, picture 1. If i'm trying to edit the resolution from the main screen detailed resolutions, i only can go up to 65 hz as anything above that will become red, picture 2. And i even tried that to see if 65 will show up, but no it doesn't.
The only way that i manage to work around is using 2k resolution through displayid2.0, everything works fine apparently, vram goes to idle frequencies, but as this is not the native resolution of the tv, everything looks a bit blurry, picture 5.