Custom Resolution Utility (CRU)

[sickgamesentertainment]

Hi,

okay, i finally understood... talking to noobs like me, is like talking to retarted people, please understand that too lol.

Anyway, i just did what you said, import the file. I tried with and without extension, i applied this to all beamers. In both versions with and without extensions the pc booted but displayed without eyefinity. However, without extension block 1 projector ran only in 60hz, the other 2 in 120hz. I could not change to 120hz in the win7 monitor settings.

and this notice came after boot: [Image: http://img.tapatalk.com/d/13/12/23/asejy9un.jpg]


WITH extension all projectors ran 120hz 1280x720 and i have created eyefinity without any problems but in 5760x1080 60hz, then i had to change resolution first in catalyst software to 3840x720 to have the same resolution in display settings selectable in windows, because without this the 3840x720 resolution was not shown as an option in windows display settings.

It does NOT work with 3D...

I hope this is the info you wanted.

Thank you for trying. If we manage to get 3D in eyefinity i promise to paypal you my gratitude!

On a side note, i will keep the 3840x720 for now but just so you know, my dream would be to run 3 times 1024x768 @ 120hz since i need a 4:3 aspect ratio for iracing. So yeah, if its fine with you 3072x768 @ 120hz would be awesome with 3D.

thanks and let me know if i can do something to help. (i have also deinstalled powerstripe and rebootrd of course prior to all doing what you told me)

TY
Alex