Custom Resolution Utility (CRU)

[ToastyX]

(11-10-2017 11:37 PM)Calan Wrote:  Hello, I've tried other mini DP converter, no one works, so I return here, my last solution.
My screen is a Fujitsu siemens Scencview p24-1w (second screen)
https://www.cnet.com/products/fujitsu-sc...-24/specs/

First problem is you didn't follow the instructions. Do not add the native resolution as a standard resolution. Add it as a detailed resolution with the "LCD standard" timing parameters. If the resolution still doesn't show up, then EDID overrides are not working with your laptop.

The main cause for your original issue seems to be a missing or corrupted EDID. CRU is supposed to show you what the monitor defines if the driver can read the EDID. "PNP09FF - Generic Non-PnP Monitor" means either the driver couldn't read the EDID for some reason or the EDID is invalid. The specs show the monitor has DVI. It'd be better to use an HDMI-DVI adapter/cable instead of VGA. That will also work around the problem if the VGA EDID is corrupted.