Custom Resolution Utility (CRU)
|
12-13-2018, 02:34 PM
(Last edited: 12-13-2018, 02:41 PM by Loz702)
Post: #3681
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(12-11-2018 03:34 AM)ToastyX Wrote:(12-11-2018 01:32 AM)Loz702 Wrote: its not too old... my laptop is capable of HDMI 2.0, as i said, its 2K/4K ready4Kx2K output does not mean HDMI 2.0. It means it can output 3840x2160, which you are getting at 30 Hz with HDMI 1.4. 60 Hz with YCbCr/RGB 4:4:4 requires HDMI 2.0 or DisplayPort 1.2. You might be able to get 60 Hz with YCbCr 4:2:0 subsampling by adding it in the extension block as a TV resolution with the "4:2:0 resolutions" checkbox, but the driver might ignore that. Since CRU can't read extension blocks with Intel GPUs, you'll also need to manually add an HDMI support data block. Hi ya, Yes, I have enabled YCbCr too. and i still dont get an option to choose my Res/Hz.. when I try to add a standard resolution, it doesn't allow me to enter it there either. I even followed the guide i mentioned before and that didnt help me. so im stuck, just like my monitor lol I'm sorry, but Yes it does. HDMI 2.0 can out put as much as a DP. I had the monitor running off my laptop perfectly fine until Windows 10 messed everything up with its auto-forced updates I just cant figure out which drivers win 10 has over written, and since then, ive had to do a clean install last week, and i'd love to get my 4K back up and running again, running at the same Hz it was before (66 hz) So I know it works. I just need your help to Force it to work again, if you wouldn't mind please? "An HDMI Cable, that is tested against the version 1.4 High Speed testing specification (10.2Gbps), will support 4K content @ 30Hz . However, 4K support beyond 50Hz (typically at 60Hz in advanced 4K UHD TVs) can only be supported using an 18Gbps capable HDMI cable (or a v2.0 HDMI)." I'm not using HDMI 1.4 like you think i am, my 4K monitor is not set to that. its set to HDMI 2.0 and I'm using my HDMI 2.0 port. I dont have a 1.4 port. And I can clearly see my 4K external Monitor is pushing out 66Hz, and is capable of 80hz (which was confirmed by AOC U2879VF manufactures today when I called them) Link to the monitor: https://eu.aoc.com/en/products/u2879vf/specs I know what my laptop specs are, and Im not new to using a PC, in fact I took a computer engineering course some way way back I maybe be daft from time to time, but I know my hardware more than the average person, and more so what its capable of doing. Any how, i truly appreciate the time you have taken to create such software, can you help me please. And yes I am using a HDMI 2.0 cable, it came with the Monitor. yes I have added HDMI blocks, but it still does not show up in the settings to choose from. Here's a snippet of the system support utility: this here is showing my external monitor --------------- Display Devices --------------- Card name: Intel® HD Graphics 4600 Manufacturer: Intel Corporation Chip type: Intel® HD Graphics Family DAC type: Internal Device Type: Full Device (POST) Device Key: Enum\PCI\VEN_8086&DEV_0416&SUBSYS_11121462&REV_06 Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER] Device Problem Code: No Problem Driver Problem Code: Unknown Display Memory: 2160 MB Dedicated Memory: 112 MB Shared Memory: 2048 MB Current Mode: 3840 x 2160 (32 bit) (30Hz) HDR Support: Not Supported Display Topology: Extend Display Color Space: DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709 Color Primaries: Red(0.632813,0.339844), Green(0.310547,0.632813), Blue(0.158203,0.060547), White Point(0.313477,0.329102) Display Luminance: Min Luminance = 0.500000, Max Luminance = 270.000000, MaxFullFrameLuminance = 270.000000 Monitor Name: AOC U2879G6 Monitor Model: U2879G6 Monitor Id: AOC2879 Native Mode: 3840 x 2160(p) (59.997Hz) Output Type: HDMI Monitor Capabilities: HDR Not Supported Display Pixel Format: DISPLAYCONFIG_PIXELFORMAT_32BPP Advanced Color: Not Supported Driver Name: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igd12umd64.dll Driver File Version: 20.19.0015.4531 (English) Driver Version: 20.19.15.4531 DDI Version: 12 Feature Levels: 11_1,11_0,10_1,10_0,9_3,9_2,9_1 Driver Model: WDDM 2.0 Graphics Preemption: Primitive Compute Preemption: Thread group Miracast: Supported Hybrid Graphics GPU: Integrated Power P-states: Not Supported Virtualization: Not Supported Block List: No Blocks Catalog Attributes: N/A Driver Attributes: Final Retail Driver Date/Size: 29/09/2016 10:00:00 AM, 39862848 bytes WHQL Logo'd: Yes WHQL Date Stamp: Unknown Device Identifier: {D7B78E66-4756-11CF-6166-1D31BAC2D935} Vendor ID: 0x8086 Device ID: 0x0416 SubSys ID: 0x11121462 Revision ID: 0x0006 Driver Strong Name: oem6.inf:5f63e534dd929195:iHSWM_w10:20.19.15.4531:pci\ven_8086&dev_0416 Rank Of Driver: 00D12001 Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_C ModeVC1_C DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeMPEG2_IDCT DXVA2_ModeVC1_D2010 DXVA2_ModeWMV9_IDCT DXVA2_ModeVC1_IDCT DXVA2_ModeH264_VLD_NoFGT DXVA2_ModeH264_VLD_Stereo_Progressive_NoFGT DXVA2_ModeH264_VLD_Stereo_NoFGT DXVA2_ModeH264_VLD_Multiview_NoFGT DXVA2_ModeHEVC_VLD_Main ======================= This here is showing my laptop's built in monitor settings, etc as you can see, its running at 60hz, but at 1920x1080 as it should. my 4K monitor is supposed to be set to 10-bit, not 8-bit as well. Card name: Intel® HD Graphics 4600 Manufacturer: Intel Corporation Chip type: Intel® HD Graphics Family DAC type: Internal Device Type: Full Device (POST) Device Key: Enum\PCI\VEN_8086&DEV_0416&SUBSYS_11121462&REV_06 Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER] Device Problem Code: No Problem Driver Problem Code: Unknown Display Memory: 2160 MB Dedicated Memory: 112 MB Shared Memory: 2048 MB Current Mode: 1920 x 1080 (32 bit) (60Hz) HDR Support: Not Supported Display Topology: Extend Display Color Space: DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709 Color Primaries: Red(0.639648,0.333008), Green(0.302734,0.613281), Blue(0.154297,0.059570), White Point(0.313477,0.329102) Display Luminance: Min Luminance = 0.500000, Max Luminance = 270.000000, MaxFullFrameLuminance = 270.000000 Monitor Name: Generic PnP Monitor Monitor Model: unknown Monitor Id: CMO1720 Native Mode: 1920 x 1080(p) (60.020Hz) Output Type: Internal Monitor Capabilities: HDR Not Supported Display Pixel Format: DISPLAYCONFIG_PIXELFORMAT_32BPP Advanced Color: Not Supported Driver Name: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igd12umd64.dll Driver File Version: 20.19.0015.4531 (English) Driver Version: 20.19.15.4531 DDI Version: 12 Feature Levels: 11_1,11_0,10_1,10_0,9_3,9_2,9_1 Driver Model: WDDM 2.0 Graphics Preemption: Primitive Compute Preemption: Thread group Miracast: Supported Hybrid Graphics GPU: Integrated Power P-states: Not Supported Virtualization: Not Supported Block List: No Blocks Catalog Attributes: N/A Driver Attributes: Final Retail Driver Date/Size: 29/09/2016 10:00:00 AM, 39862848 bytes WHQL Logo'd: Yes WHQL Date Stamp: Unknown Device Identifier: {D7B78E66-4756-11CF-6166-1D31BAC2D935} Vendor ID: 0x8086 Device ID: 0x0416 SubSys ID: 0x11121462 Revision ID: 0x0006 Driver Strong Name: oem6.inf:5f63e534dd929195:iHSWM_w10:20.19.15.4531:pci\ven_8086&dev_0416 Rank Of Driver: 00D12001 Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_C ModeVC1_C DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeMPEG2_IDCT DXVA2_ModeVC1_D2010 DXVA2_ModeWMV9_IDCT DXVA2_ModeVC1_IDCT DXVA2_ModeH264_VLD_NoFGT DXVA2_ModeH264_VLD_Stereo_Progressive_NoFGT DXVA2_ModeH264_VLD_Stereo_NoFGT DXVA2_ModeH264_VLD_Multiview_NoFGT DXVA2_ModeHEVC_VLD_Main ================== and here is the Geforce GTX 850M card details D3D9 Overlay: Supported DXVA-HD: Supported DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled MPO MaxPlanes: 1 MPO Caps: Not Supported MPO Stretch: Not Supported MPO Media Hints: Not Supported MPO Formats: Not Supported PanelFitter Caps: Not Supported PanelFitter Stretch: Not Supported Card name: NVIDIA GeForce GTX 850M Manufacturer: NVIDIA Chip type: GeForce GTX 850M DAC type: Integrated RAMDAC Device Type: Render-Only Device Device Key: Enum\PCI\VEN_10DE&DEV_1391&SUBSYS_11121462&REV_A2 Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER] Device Problem Code: No Problem Driver Problem Code: Unknown Display Memory: 10170 MB Dedicated Memory: 2019 MB Shared Memory: 8150 MB Current Mode: Unknown HDR Support: Unknown Display Topology: Unknown Display Color Space: Unknown Color Primaries: Unknown Display Luminance: Unknown Driver Name: C:\Windows\System32\DriverStore\FileRepository\nvmiwu.inf_amd64_7b11efeca48cd7d3\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nvmiwu.inf_amd64_7b11efeca48cd7d3\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nvmiwu.inf_amd64_7b11efeca48cd7d3\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nvmiwu.inf_amd64_7b11efeca48cd7d3\nvldumdx.dll Driver File Version: 22.21.0013.8205 (English) Driver Version: 22.21.13.8205 DDI Version: 12 Feature Levels: 11_0,10_1,10_0,9_3,9_2,9_1 Driver Model: WDDM 2.2 Graphics Preemption: DMA Compute Preemption: DMA Miracast: Not Supported by Graphics driver Hybrid Graphics GPU: Discrete Power P-states: Not Supported Virtualization: Not Supported Block List: No Blocks Catalog Attributes: N/A Driver Attributes: Final Retail Driver Date/Size: 1/05/2017 10:00:00 AM, 901712 bytes WHQL Logo'd: Yes WHQL Date Stamp: Unknown Device Identifier: Unknown Vendor ID: 0x10DE Device ID: 0x1391 SubSys ID: 0x11121462 Revision ID: 0x00A2 Driver Strong Name: oem10.inf:0f066de37f18c115:Section070:22.21.13.8205:pci\ven_10de&dev_1391&subsys_11121462 Rank Of Driver: 00D10001 Video Accel: Unknown DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeVC1_D2010 DXVA2_ModeVC1_VLD DXVA2_ModeH264_VLD_Stereo_Progressive_NoFGT DXVA2_ModeH264_VLD_Stereo_NoFGT DXVA2_ModeH264_VLD_NoFGT DXVA2_ModeHEVC_VLD_Main DXVA2_ModeMPEG4pt2_VLD_Simple DXVA2_ModeMPEG4pt2_VLD_AdvSimple_NoGMC Deinterlace Caps: n/a D3D9 Overlay: Unknown DXVA-HD: Unknown DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled MPO MaxPlanes: 0 MPO Caps: Not Supported MPO Stretch: Not Supported MPO Media Hints: Not Supported MPO Formats: Not Supported PanelFitter Caps: Not Supported PanelFitter Stretch: Not Supported (12-13-2018 02:06 PM)Cheffy Wrote:(12-13-2018 01:53 PM)Loz702 Wrote:(12-12-2018 05:33 AM)ToastyX Wrote:(12-11-2018 03:50 AM)Cheffy Wrote: I should've mentioned that I've tried all of the above with both a displayport cable and HDMI. Does displayport not work? I'll try the HDMI unplugging trick but you're right, it's better to get an officially supported monitor. Problem is it's hard to find a 27" 1440p freesync monitor that isn't 144+hz, which boosts the price a lot over this 60/75hz model.Enabling FreeSync unofficially only works with HDMI. you just said unofficially, its been official for years, sorry for helping I only posted it as mine is an AMD FreeSync too. But its not needed unless ur using a D.P unless youre referring to your monitor? I was just making a statement in general, is all Sorry for trying to be of some use have a good one.. peace |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 88 Guest(s)