Custom Resolution Utility (CRU)

[ToastyX]

(01-18-2019 10:29 PM)rayw_cru Wrote:  Would like to report a potential bug: I recently got an LG 34GK950F and noticed that CRU doesn't show any of the higher refresh rates, nor a FreeSync range entry in the extended block.

What video card do you have? CRU asks the driver for the full EDID, but if the driver can't provide it for some reason, then CRU can't read the extension blocks. Try running reset-all.exe and reboot, and then check if CRU can read them.

(01-18-2019 10:29 PM)rayw_cru Wrote:  It also doesn't let me add a custom entry with the native 3440x1440@144Hz resolution (attached screenshot of CRU 1.4.1).

Detailed resolutions with pixel clocks greater than 655.35 MHz have to be added using a DisplayID extension block, which is probably what the second default extension block would be if CRU could read it.