Catleap 'blurry' after booting or waking from sleep

[asimov]

Hi all,

I was wondering if anyone can shed any light on the following problem I'm having.
I have a 2B (primary) and a regular Q270 SE in extended mode using the Nvidia 314.07 driver on a GTX 660. Everything is patched OK using the latest nvlddmkm-patcher-1.1.3. I can confirm this as can OC the 2B fine. The 2B runs at 100Hz and SE at 60Hz, both at the native 2560 x 1440 res.

Now, the problem I have is half the time when the PC wakes from sleep, or boots up, the non-2B will look 'blurry' for lack of a better description. Sometimes hitting the 'Detect' button in the Win 7 Display>Screen Resolution window will fix the blurriness (with the detection sound heard as if unplugging and re-plugging in monitor). The other way to fix it is to physically un- and re-plug the DVI cable - this can take a few tries sometimes. I have eliminated the DVI cable as the problem as have tried a few and have also changed the monitor to the other DVI port on the graphics card. This also happens both when the 2B is clocked at 60Hz (unpatched) and overclocked to 100Hz. Both screens are connected directly to the DVI ports of the 660, no adapter involved.

Does this sound like a problem with the EDID file? I've read that setting the resolution in CRU can fix this but am not sure I've done this correctly so have added a few screenies (sorry they're so large).

Any help would be great - Thanks

[Image: http://120hz.net/attachment.php?attachmentid=913&d=1364649099]

[Image: http://120hz.net/attachment.php?attachmentid=915&d=1364649102]

[Image: http://i47.tinypic.com/2ymunwy.jpg]