Strobelight - LightBoost Utility for AMD/ATI and NVIDIA

[Valafar]

(04-13-2017 01:41 AM)ToastyX Wrote:  

(04-12-2017 09:38 AM)Valafar Wrote:  I am using a Asus VG278HE Monitor with DVI, since it doesn't have Displayport. I tried using a DP DVI adapter to check if DVI is the issue.
But now strobelight says that no 120Hz display got found.
I also reinitialized and downloaded the latest driver from the first page (17.4.2) without any success.
When I choose refresh rates in the setup, I chose 120Hz (strobed) and 121 Hz. (Not sure if that could matter in any way)

You can't use a DP-DVI adapter unless it's one of those expensive dual-link adapters, and you won't be able to initialize the monitor with the adapter either. If you're able to run Strobelight with DVI directly, then the monitor is already initialized anyway. If the strobing options don't do anything, then it's probably a refresh rate issue. After installing the refresh rates and rebooting, are 120 Hz and 121 Hz both available in the Windows display adapter settings?

Well I figured that the adapter doesn't work already as well, so I guess that's the problem, on the first page you say that the RX cards dont work properly with DVI. Also I checked the windows display adapter settings and both 120 121 Hz is available, 120 ist checked.