QNIX QX2710LED Help! Changed Video Cards and now can't OC

[slipstream1982]

(11-20-2015 02:51 AM)ToastyX Wrote:  

(11-19-2015 03:14 PM)slipstream1982 Wrote:  @ToastyX: It's a QX2710LED, it's currently in 1920x1080 @ 60hz..? I used to use 1920x1080 @ 110hz but now it won't output that. Should I take a screencap to show that it's working it at 1920x1080? Not sure why its working if it shouldn't be, maybe they sent me the wrong monitor?

1920x1080 @ 60 Hz is GPU scaled. The monitor only defines 2560x1440 @ 60 Hz. The driver automatically adds 1920x1080 as a scaled resolution.

CRU adds monitor resolutions, so if you add 1920x1080 @ 110 Hz, it will be sent to the monitor, but the QNIX can't handle 1920x1080. You need to add 2560x1440 @ 110 Hz. The driver will automatically add 1920x1080 @ 110 Hz as a scaled resolution. Then you should be able to use 1920x1080 @ 110 Hz.

The same applies with NVIDIA. You probably created a scaled resolution using the NVIDIA control panel without realizing it by only changing the resolution at the top and not the active pixels in the timing section.

I've found that the Nvidia control panel just let me set the resolution and hz to whatever I wanted, so it wasn't as much of an issue. Thanks for your help