Post Reply
Custom Resolution Utility (CRU)
11-11-2013, 02:26 PM
Post: #421
RE: Custom Resolution Utility (CRU)
Great Utility. I'm gonna donate ASAP, no CC and no money on my Paypal account ATM.

Strange thing is, i can establish new refresh rates on my secondary display only while the primary stays always at 60Hz.

My JTC TV runs always 75Hz as secondary even when present at boot, my LG 55LA6608 runs 75Hz only if it is switched on after booting.

Both are connected via DVI over HDMI with Adapters. I ran reset-all and edited the first detailled resolutions in both fresh entries, tried also to set everything in there to 75Hz accordingly, tried with the first detailled resolutions only (deleted the rest) and booted with minimum services (Microsoft defaults only).

System is Windows 7 Ultimate 64, AMD 7970 Catalyst 13.4
Find all posts by this user
Quote this message in a reply
11-11-2013, 05:22 PM (Last edited: 11-11-2013, 05:23 PM by Ilya)
Post: #422
RE: Custom Resolution Utility (CRU)
I was wondering if anyone can advise me:

I use to have 660ti SLI and ran at 120hz no problem
Switched to 280x CF and ran at 120hz no problem
Switched to 780 SLI and I'm getting 1-2 small flicker lines at 120hz, but everything is fine at 115hz.


I tried reduced timings, but still get that 1-2 lines
Find all posts by this user
Quote this message in a reply
11-11-2013, 07:41 PM
Post: #423
RE: Custom Resolution Utility (CRU)
(11-11-2013 05:22 PM)Ilya Wrote:  Switched to 780 SLI and I'm getting 1-2 small flicker lines at 120hz, but everything is fine at 115hz.
That is a signal quality problem. If you have the QNIX or X-Star, try setting the totals to 2652x1445. If that doesn't help, try another DVI port, or try connecting the monitor to the other card.
Find all posts by this user
Quote this message in a reply
11-11-2013, 08:26 PM
Post: #424
RE: Custom Resolution Utility (CRU)
Thanks so much toasty.

Switching to different DVI port worked.

which is weird because it was connected to DVI D dual link and now its connected to DVI I dual link
Find all posts by this user
Quote this message in a reply
11-11-2013, 11:40 PM
Post: #425
RE: Custom Resolution Utility (CRU)
(11-11-2013 02:26 PM)JamesBolivar Wrote:  Strange thing is, i can establish new refresh rates on my secondary display only while the primary stays always at 60Hz.

My JTC TV runs always 75Hz as secondary even when present at boot, my LG 55LA6608 runs 75Hz only if it is switched on after booting.
What does this mean? Is 75 Hz not getting listed? Are you keeping the pixel clock under 165 MHz? If not, does patching the driver make a difference? You can also try the "LCD reduced" timing option to keep the pixel clock under 165 MHz at 75 Hz.
Find all posts by this user
Quote this message in a reply
11-13-2013, 07:39 AM (Last edited: 11-13-2013, 08:00 AM by shivakanou)
Post: #426
RE: Custom Resolution Utility (CRU)
Hi everybody.

I have a Philips Monitor and I'm having a resolution problem.
The screen image is very sharp (letters, images..) and I don't know how to fix it.
I was able to fit the screen into my monitor with CRU + Nvidia tools but now I can't seem to fix the resolution.

Sad Do you guys have any suggestions?

Thanks
Find all posts by this user
Quote this message in a reply
11-13-2013, 09:26 AM
Post: #427
RE: Custom Resolution Utility (CRU)
Sharp is good though, isn't it?
Find all posts by this user
Quote this message in a reply
11-13-2013, 02:10 PM
Post: #428
RE: Custom Resolution Utility (CRU)
(11-11-2013 11:40 PM)ToastyX Wrote:  What does this mean? Is 75 Hz not getting listed? Are you keeping the pixel clock under 165 MHz? If not, does patching the driver make a difference? You can also try the "LCD reduced" timing option to keep the pixel clock under 165 MHz at 75 Hz.

Pixel clock is 164.61 MHz for both displays. 75Hz gets listed for the secondary display of an extended desktop, whichever this is. If i switch main/extended and reboot 75Hz gets listed for the other one. Disabling all non Microsoft Services made no difference.
Find all posts by this user
Quote this message in a reply
11-13-2013, 03:52 PM (Last edited: 11-13-2013, 03:52 PM by shivakanou)
Post: #429
RE: Custom Resolution Utility (CRU)
(11-13-2013 09:26 AM)Black Octagon Wrote:  Sharp is good though, isn't it?

Not really.
I had to take a picture to show, if I just take a screenshot it doesn't show the problem XD

Here: http://i.imgur.com/uLskuz6.jpg

Thats what's happening D:
Find all posts by this user
Quote this message in a reply
11-14-2013, 11:35 AM
Post: #430
RE: Custom Resolution Utility (CRU)
Huge noob here, so sorry for all inevitable mistakes in what i say. So, i want to render at a higher resolution than what my monitor is able to do (Samsung SMBX2235 1080p) and i don't really understand how to do it. I start CRU, it already has a detailed res defined (native one i suppose) so i add a new one. I use the auto standar LCD timing and a ****x**** res that is higher than 1920x1080 (and is 16:9). No matter what res i setup there, after restart i still can't see it / use it. What am i doing wrong?
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 130 Guest(s)