Post Reply
Custom Resolution Utility (CRU)
10-26-2015, 02:42 PM (Last edited: 10-26-2015, 02:44 PM by Sayake)
Post: #1731
RE: Custom Resolution Utility (CRU)
(10-26-2015 08:11 AM)falkentyne Wrote:  Google is your friend.

You're looking for an option called WIDE/ORIGINAL.

Original is 1:1. 1024x768 with black bars.
Wide is "widescreen" aka stretched.

I don't know what you mean by "overclock" though.

http://www.teamfortress.tv/9657/wanna-us...cant-do-it


when i try to play with the monitor settings, and get to the display section, i told you that i get the message "cannot be used, available in d-sub signal only".

Ok i see it now, but the wide/original option is greyed out and its selected wide, cant change it.
Find all posts by this user
Quote this message in a reply
10-27-2015, 02:57 AM
Post: #1732
RE: Custom Resolution Utility (CRU)
Hey guys.

Anyone running CRU and eyefinity? Looks like since catalyst 15.7.1 and now 15.9 there is some issue with eyefinity and any CRU refresh rate above the standard. I can get refresh rate on my XL2730z with DVI-D to display up to 120hz single monitor, but when I hit eyefinity, black screen and monitors lose signal.

Confused

Thanks!
Find all posts by this user
Quote this message in a reply
10-27-2015, 12:55 PM
Post: #1733
RE: Custom Resolution Utility (CRU)
(10-26-2015 07:21 AM)Sayake Wrote:  So I've been playing CSGO on 75hz 1024x768 thanks to this great tool, however I want to gave black bars, so I decided to enable gpu upscaling, however when I do that the overclock isn't taken into effect, and when i disable it the overclock is back, but there is no other way for me to get black bars, I've tried to play with my monitors options however when I head to the display option it says "cannot be used available in d-sub signal only" I'm using an AMD card and a LG E2242 monitor.
GPU scaling uses the native resolution. To use GPU scaling, you'd have to add 75 Hz at the native resolution if the monitor can handle that. Otherwise, you'll have to disable GPU scaling and use the monitor's scaling options.

(10-26-2015 02:42 PM)Sayake Wrote:  Ok i see it now, but the wide/original option is greyed out and its selected wide, cant change it.
Try setting the lower resolution first.
Find all posts by this user
Quote this message in a reply
10-27-2015, 01:19 PM
Post: #1734
RE: Custom Resolution Utility (CRU)
(10-19-2015 02:15 AM)markanini Wrote:  I have 60 Hz and 59.94 Hz set in CRU but under windows display settings I only get a single 60 Hz option. Similarly 47.952 Hz & 48 Hz show as a single 48Hz onyl. Is there any way around this? I have an AMD HD 7700 running Windows 10.
That is not possible with CRU. Windows can only list refresh rates as integers, and the driver will round up 59.94 Hz to 60 Hz. The driver also adds 59 Hz as an alias of 60 Hz, so that would interfere with having separate 59 Hz and 60 Hz entries.

(10-19-2015 04:25 PM)markanini Wrote:  Maybe I can settle with 48Hz and 71.928Hz and the just the even 60 Hz. What do you think?
That will work.

(10-26-2015 12:01 AM)markanini Wrote:  What do you think is going on here?
[Image: emNuKPB.png]
The driver automatically adds aliases for certain refresh rates with TV resolutions: https://support.microsoft.com/en-us/kb/2006076
Find all posts by this user
Quote this message in a reply
10-27-2015, 01:21 PM
Post: #1735
RE: Custom Resolution Utility (CRU)
(10-27-2015 12:55 PM)ToastyX Wrote:  
(10-26-2015 07:21 AM)Sayake Wrote:  So I've been playing CSGO on 75hz 1024x768 thanks to this great tool, however I want to gave black bars, so I decided to enable gpu upscaling, however when I do that the overclock isn't taken into effect, and when i disable it the overclock is back, but there is no other way for me to get black bars, I've tried to play with my monitors options however when I head to the display option it says "cannot be used available in d-sub signal only" I'm using an AMD card and a LG E2242 monitor.
GPU scaling uses the native resolution. To use GPU scaling, you'd have to add 75 Hz at the native resolution if the monitor can handle that. Otherwise, you'll have to disable GPU scaling and use the monitor's scaling options.

(10-26-2015 02:42 PM)Sayake Wrote:  Ok i see it now, but the wide/original option is greyed out and its selected wide, cant change it.
Try setting the lower resolution first.

And make sure you disabled GPU scaling before setting the lower resolution.

You'll know if GPU scaling is disabled if you go into the monitor OSD's "information/system" area and it shows 1024x768. There's literally almost a 0% chance that WIDE/ORIGINAL would be greyed out if the monitor (not computer/video card) system OSD area says you're at 1024x768. That's impossible. (I remember even my old Samsung T220 had that option available).

If the information/system area says you're at 1920x1080, it means GPU scaling is *still* enabled. Make sure you created the resolution and restarted the driver and switched to it.
Find all posts by this user
Quote this message in a reply
10-27-2015, 03:41 PM
Post: #1736
RE: Custom Resolution Utility (CRU)
(10-27-2015 01:21 PM)falkentyne Wrote:  
(10-27-2015 12:55 PM)ToastyX Wrote:  
(10-26-2015 07:21 AM)Sayake Wrote:  So I've been playing CSGO on 75hz 1024x768 thanks to this great tool, however I want to gave black bars, so I decided to enable gpu upscaling, however when I do that the overclock isn't taken into effect, and when i disable it the overclock is back, but there is no other way for me to get black bars, I've tried to play with my monitors options however when I head to the display option it says "cannot be used available in d-sub signal only" I'm using an AMD card and a LG E2242 monitor.
GPU scaling uses the native resolution. To use GPU scaling, you'd have to add 75 Hz at the native resolution if the monitor can handle that. Otherwise, you'll have to disable GPU scaling and use the monitor's scaling options.

(10-26-2015 02:42 PM)Sayake Wrote:  Ok i see it now, but the wide/original option is greyed out and its selected wide, cant change it.
Try setting the lower resolution first.

And make sure you disabled GPU scaling before setting the lower resolution.

You'll know if GPU scaling is disabled if you go into the monitor OSD's "information/system" area and it shows 1024x768. There's literally almost a 0% chance that WIDE/ORIGINAL would be greyed out if the monitor (not computer/video card) system OSD area says you're at 1024x768. That's impossible. (I remember even my old Samsung T220 had that option available).

If the information/system area says you're at 1920x1080, it means GPU scaling is *still* enabled. Make sure you created the resolution and restarted the driver and switched to it.

thanks, i've put the resolution to the desired one, and the wide/original was available, changed it, changed back to normal resolution and it has worked, thanks alot!
Find all posts by this user
Quote this message in a reply
10-29-2015, 04:08 PM
Post: #1737
RE: Custom Resolution Utility (CRU)
Hi all, I just subscribed to the forum hoping to get some help. First of all, mad props to ToastyX for CRU, I used it on my previous Packard Bell gaming laptop to play CSGO and I easily pushed it from 60hz to 100Hz.

I very recently bought a new gaming laptop, this very model, an Acer with a GeForce 960M. However, I did not know it came with the fucked-up "Optimus" technology that still uses the shitty Intel 4600 integrated graphics to handle Windows (unsupported by CRU). I did my homework searching the forum, found in this post no more hope. It's frustrating, because I have an awesome computer but limited to 60Hz now.

So, could someone either confirm me that I am completely, 100% fucked, or is there a way to circumvent the problem by, for example, kill the Intel graphics to force the GeForce (no pun intended) to run Windows and handle resolution, enabling it to push my refresh rate OVER 9000 (or at least to a good 90-100Hz)?

Many thanks for all your help Monitor Tests, you are my last spark of hope.
Find all posts by this user
Quote this message in a reply
10-29-2015, 09:39 PM
Post: #1738
RE: Custom Resolution Utility (CRU)
Hi

I just downloaded this program and when I click restart, I get this kind of error. Any idea how to fix it ?

[Image: Rb8Wm4G.png]

I got winxp 32 bit and Radeon HD7770
Find all posts by this user
Quote this message in a reply
10-30-2015, 04:16 AM
Post: #1739
RE: Custom Resolution Utility (CRU)
(10-29-2015 09:39 PM)cbasd Wrote:  Hi

I just downloaded this program and when I click restart, I get this kind of error. Any idea how to fix it ?

[Image: Rb8Wm4G.png]

I got winxp 32 bit and Radeon HD7770

ToastyX already made it clear that Windows XP is NOT supported !
Find all posts by this user
Quote this message in a reply
10-30-2015, 05:27 PM
Post: #1740
RE: Custom Resolution Utility (CRU)
Hello everybody! My first post to the forum.. First of all, thanks to ToastyX for this awesome tool..

I hope somebody will be able to help me. I have a 2560x1080 LG monitor and a R9 390 with a short Big Grin displayport cable.. tried standard, reduced and even copying the original settings and then changing only the refresh rate (manual) and nothing! not even 3hz.. it just gives me some colorful mess.. I've noticed that both default polarities in 2560x1080 are negative.. please help!!! my exact monitor model is LG 25ub55
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 108 Guest(s)