Custom Resolution Utility (CRU)
|
12-30-2012, 01:11 AM
(Last edited: 12-30-2012, 01:21 AM by Mangix)
Post: #9
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
I have no resolutions added from nvidia's control panel. Here's a screenshot: https://dl.dropbox.com/u/102011983/high%...01080p.png
and https://dl.dropbox.com/u/102011983/high%...nvidia.png edit: for some reason, the checkbox in the second screenshot never seems to get properly applied. The first resolution under PC is always checked and always matches the current refresh rate. I'm not sure if this is intentional or an oddity. When I used to manually modify the EDID with a .inf file, I always increased the maximum supported resolution as well as set the signal type to HDMI-A(default is set to DVI-D even though the connection is made through HDMI). edit2: this is also an oddity. https://dl.dropbox.com/u/102011983/high%...nitor1.png https://dl.dropbox.com/u/102011983/high%...nitor2.png Happens when I do a .inf mod as well. |
|||
« Next Oldest | Next Newest »
|