Custom Resolution Utility (CRU)

[ToastyX]

(02-15-2021 02:02 AM)erilson Wrote:  Both don't have Freesync but I used the default extension block CTA-861 to manually add it in.

I somehow turned on Freesync on the XL2411Z by doing so with 50-60 hz range.

But changing both Freesync and the hz on the U2913WM won't work after applying it in CRU, but oddly using the Radeon Software's custom resolution allowed it to go up to 80hz from 60hz.

The FreeSync data block would only work with HDMI. The driver might be listening to the max pixel clock in the range limits, which CRU does not include by default. Try using the "Edit..." button at the top and increase the max pixel clock, and make sure "Include if slot available" is enabled. Then see if you can add higher refresh rates.