Custom Resolution Utility (CRU)

[Hagerboy]

(02-20-2021 01:33 PM)ToastyX Wrote:  

(02-19-2021 08:59 PM)Hagerboy Wrote:  I'm currently trying to create a custom resolution for my TV (se39uy04) since whenever I try to put the refresh rate above 30, it sets itself to 656 x 496 and any other resolution will just be 4k@30 scaled down to the specified size. I've read that I need to change the DALNonStandardModesBCD2 entry but my computer seems to lack most DAL entries. I've already run the pixel patch.

https://www.overclock.net/attachments/16...4c13e4884e

Is there another way to unlock my TV's refresh rate so that I can hopefully reach 2560 x 1440 @ 72hz?

That TV doesn't support refresh rates greater than 60 Hz, and it only supports 30 Hz at 3840x2160, so you need to choose a resolution that has 60 Hz available. I don't see what DALNonStandardModesBCD2 has to do with your problem, and you don't need the pixel clock patch. You should be able to add 2560x1440 @ 60 Hz as a detailed resolution. Make sure GPU scaling is disabled if you want the TV to handle lower resolutions.

I have no idea what changed but I ran reset all and deleted the profile I made and recreated a 2k@60fps profile and for some reason it now works?? Thanks for the input anyway. Now I just need to figure out why it doesn't allow the usb to update it... Sorry for the trouble!