Custom Resolution Utility (CRU)

[Nimmy]

(05-17-2021 02:25 AM)ToastyX Wrote:  

(05-16-2021 10:54 PM)Nimmy Wrote:  I'm using an AW2521H. 360hz, G-sync monitor. I've done the Display 2.0 and 1.3 extension block and added my native and desired reso to them both, neither worked. I get the red text every time. Really want to get this working but i'm not sure what to do the only other guy in this thread who had this monitor stopped responding. Any ideas?

What exactly did you enter and where?

Here are the steps I took:

1. Delete current extension blocks, Add in Display 2.0 or 1.3 (Ended up only doing 1.3 since when I reset on 2.0 the montior went black.) Then Press ok/restart driver

2. On new block(display 1.3), I created new detailed resolutions at 360hz 1080p(native) and 1680x1050 360hz and i tried using automatic(PC), Exact, Exact Reduced. Then Press ok/restart driver

3. Went to the Detailed Resolution section, tried to create 360hz with both 1080p native and 1680x1050 using all timing settings, got red text every time.

Note: I tried some other random stuff along those lines, just cant remember. These are just the ones that I think shouldve worked based on what I read in the thread. Sorry if this has already been gone over, but I couldn't find it.

Edit: I saw you had asked someone if you could run some tests with a two extension block monitor, I'd be willing to help you do this if you still need it as long as there is like no risk of anything super harmful happening lol. My discord is Matt22#8058 , id be happy to help if it can help you create this compadibility