Custom Resolution Utility (CRU)

[viking]

(09-07-2012 09:06 PM)ToastyX Wrote:  Custom Resolution Utility (CRU) allows custom resolutions to be defined for both AMD/ATI and NVIDIA GPUs by creating EDID overrides directly in the registry without having to deal with inf files.

Quick start:
[*]Choose a display from the drop-down list.

• "(active)" means the display is connected and the configuration is active.
• "*" means changes were saved and an override is in effect.
  

[*]Edit the configuration as desired.

• The first detailed resolution is considered the preferred or native resolution. To make games use a higher refresh rate, define it as the first detailed resolution.
• At least one detailed resolution should be defined. All other resolutions can be removed if they are not needed.
• NVIDIA users must either uncheck "Include extension block" or import a custom extension block for custom resolutions to work.
  

[*]Repeat steps 1-2 for other displays if required.

• The "Copy" and "Paste" buttons can be used to copy all the resolutions from one display to another.
  

[*]Click "OK" to save the changes.
[*]Reboot.

I am trying to understand how to use Utility for my purpose. I have a dual monitor system, Primary LCD display and a Projector as an extended display. The Projector is connected via an IOGEAR wireless transmitter/receiver. CRU sees the transmitter as "EXP0901- EP-HDMI-RX" and the projector as "MEID08E - AE3000".

In Nvidia Control panel, and when the transmitter/receiver is connected to the projector, I see the AE3000 and I change the content type from the default "Auto-select" to "Full-screen videos". However, when I turn off the projector, NVIDIA sees EP-HDMI-RX instead. The next time that I turn on the projector, I am back to the default "Auto-select".

I would need the "Full-screen videos" setting to stick, and I believe that the only way to do this is to "trick" windows into believing that it is always connected to the AE3000 rather than sometimes to the EP-HDMI-RX.

Is this possible? Can I trick windows into believing that the EP-HDMI-RX is the AE3000 (would this be an EDID override?)? If so, how would I do this?

TIA!!!