Custom Resolution Utility (CRU)
|
05-02-2022, 03:50 PM
(Last edited: 05-03-2022, 12:52 PM by vanden)
Post: #6549
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
3DTV Play only supports 1280x720 @ 60 Hz and 1920x1080 @ 24 Hz.
Yes my problem is 23.976 and 24 Hz.... By setting the frequency to 23 hz or 24 hz (in Windows) when it goes to 3D it goes all alone to 23.976 hz (when film 23.976) or 24 hz (when film has 24 hz). Only the resolution 1920*1080 @ 24Hz in "TV resolution" the problem and that I have a frame every 40 min which zaps ... In 2D I have no lost frames (MPC HC/MADVR: no frame drops/repeats expected) Is there a way to change the timings in "TV resolution"? This one works very well in 2D It's 3 timing are ok in 2D : 638 / 44 / 160 = 842 / 1920 = 2762 / + 4 / 5 / 40 = 49 / 1080 = 1129 / + 74.77 mhz 638 / 44 / 192 = 874 / 1920 = 2794 / + 4 / 5 / 42 / = 51 / 1080 = 1131 / + 75.77 mhz 638 / 44 / 148 = 830 / 1920 = 2750 / + 4 / 5 / 24 = 33 1080 = 1113 / + 73.39 mhz TV resolution 3D 40min drop : (madVR CTA CTA timing parametrers for digital TVs) 638 / 44 / 148 = 830 / 1920 = 2750 / + 4 / 5 / 36 = 45 / 1080 = 1125 / + 74.18 mhz |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 118 Guest(s)