Custom Resolution Utility (CRU)

[p14t1pu516]

(12-28-2022 03:38 PM)ToastyX Wrote:  

(12-28-2022 04:33 AM)p14t1pu516 Wrote:  hi, thank you, Tv led lce24xh12 hd sanyo -resolución hd (1366 x 768), and windows recommend that resolution.
I tested the tv on two other tvs noblex 32 and 46 and have the same problem.
thank you very much for u time

1366x768 @ 60 Hz doesn't need anything special. If you don't need audio, you can just delete the extension block and make sure 1366x768 @ 60 Hz is the first detailed resolution. That will make the computer send a DVI signal instead of HDMI, which TVs normally don't mess with. If you do need audio, then you'll have to import hdmi-audio.dat, but the TV likely does some image processing with HDMI signals, which is probably why it looks bad. Some TVs have a way to disable the processing or individual settings such as overscan and sharpening, but that depends on the TV.

Also, try the quantization range and YCbCr options in Intel's control panel:
https://www.intel.com/content/www/us/en/...phics.html
https://www.intel.com/content/www/us/en/...phics.html

You shouldn't need to format to fix any graphics issue. Just boot Windows into safe mode and run reset-all.exe to remove all CRU changes. For graphics driver issues, you can use DDU to completely uninstall the graphics driver and remove all settings: https://www.wagnardsoft.com/display-driv...aller-DDU-

i did the first, deleted the extension block, 1366x768 @ 60 Hz in the first detailed resolution. But when i restart or turn on the pc, it start with hdmi with the same problem. After that, when the screen comes back after disconnecting from inactivity, then yes, turn to dvi.
Also i try by importing hdmi-audio.dat and editing (deleted hdmi block), and when i restart or turn on the pc, it start with hdmi with the same problem. And when it returns from inactivity, the black screen stays endlessly making the noise when you connect or disconnect a device from the pc, and when move the mouse, then turn to dvi.
thank you bro