Custom Resolution Utility (CRU)

[Neobioz]

(02-16-2023 05:50 AM)ToastyX Wrote:  

(02-16-2023 02:40 AM)Neobioz Wrote:  Hello @ToastyX ! I have a Samsung G9 Odissey screen I use it with the PBP function which gives me two screens. They are connected to an MSI RTX 4080 Supprim X with Windows 11. Unfortunately my display port 1 is detected as screen 2 and vice versa for display port 2 by Windows. Before I had an RTX 2080 and when I had the problem with this same screen, I used your software (RESET ALL) to redefine the identification of the monitor but since I am on the RTX 4080 impossible to make the change identification. Do you have a solution please or is it necessary to update the CRU software ? Thank you for your answer and sorry for my approximate English I am French.

You can set the main screen in the Windows display settings. CRU doesn't have control over that.

Thank you for your reply. Defining the main screen in the settings does not change the identification it just puts my screen identified in 2 as the main screen. This is not my goal but to modify the identifications. It does not matter, thank you anyway, but I ended up plugging my 2nd display port into my motherboard and I have the correct identifications.
For information, the .exe called RESET ALL really allowed me to change these identifications when I had my 2080, why I don't know. Thanks again and good luck for the future.