Custom Resolution Utility (CRU)

[ToastyX]

(08-08-2023 11:32 PM)kaladar Wrote:  Dunno if the driver might have crashed since I did reboot before attaching old monitor. Both monitors had been unplugged before and I could not go into recovery mode since I didnt see anything on new one once in boot manager, but i'll try now for the old one at least.
There's some success, I can now use the new Monitor as before but the old one would stay in 720p. Device Manager detects (by name), I can also install the Monitor driver. CRU does list all the edid infos both monitors supports. It all happend directly on CRU-reset/restart. But I think it might be a Win11(22h2) or Nvidia (536.67) bug.
EDIT: With new monitor plugged in both stay black - could it be it doesnt support that forced reolution? With only the old one I could go into safe mode. But couldnt open device manager. the reolution was forced to 640x480 which I know is not normal on that system/that monitor.

I'm not aware of any issue that would persist after using DDU. What did you do to make the new monitor work again? I would still like to see a screen shot of Device Manger listing the display adapters and the monitors with the old monitor and the new monitor, separately if you can't use them at the same time. If CRU sees the monitors, run this with the old monitor and the new monitor separately, and post the test.txt here: https://www.monitortests.com/EDID-test.zip