Custom Resolution Utility (CRU)

[sickgamesentertainment]

(12-28-2013 07:33 PM)ToastyX Wrote:  

(12-28-2013 12:11 AM)sickgamesentertainment Wrote:  alright, thanks... i found the reset-all now and thats what i did.
Using the link that you provided i used the software to read out edid.
I hope this is the file that you wanted:

I need one of the text files, not the log file.

I want to try something simple first. Try importing this: http://www.toastyx.net/720p120-hdmi-3d.dat

Check if 3D works with and without Eyefinity.

(12-28-2013 12:11 AM)sickgamesentertainment Wrote:  Is it possible to delete or modify the EDID of the projector?
Cause i may have done so...
Or is that what we are doing anyway the whole time with the CRU?

CRU overrides the EDID through software. It doesn't affect the EDID on the projector.

Hi,

i tried it in every way possible, with eyefinity, without eyefinity, with extension blocks and without. No 3D. No other major changes either, not better, not worse, all projecters run at 120hz.

Sorry here is one of the three textfiles.
  .0.1.txt (Size: 830 bytes / Downloads: 873) Uhm, this one is created just now, so i suppose you need me to reset everything and send the same textfile again, right?

---

(12-28-2013 10:12 PM)sickgamesentertainment Wrote:  

(12-28-2013 07:33 PM)ToastyX Wrote:  

(12-28-2013 12:11 AM)sickgamesentertainment Wrote:  alright, thanks... i found the reset-all now and thats what i did.
Using the link that you provided i used the software to read out edid.
I hope this is the file that you wanted:

I need one of the text files, not the log file.

I want to try something simple first. Try importing this: http://www.toastyx.net/720p120-hdmi-3d.dat

Check if 3D works with and without Eyefinity.

(12-28-2013 12:11 AM)sickgamesentertainment Wrote:  Is it possible to delete or modify the EDID of the projector?
Cause i may have done so...
Or is that what we are doing anyway the whole time with the CRU?

CRU overrides the EDID through software. It doesn't affect the EDID on the projector.

Hi,

i tried it in every way possible, with eyefinity, without eyefinity, with extension blocks and without. No 3D. No other major changes either, not better, not worse, all projecters run at 120hz.

Sorry here is one of the three textfiles. Uhm, this one is created just now, so i suppose you need me to reset everything and send the same textfile again, right?

-----------------

here is the textfile AFTER reset-all and reboot:
  .0.1.txt (Size: 830 bytes / Downloads: 766)