Custom Resolution Utility (CRU)

[Bklynnykid]

(01-14-2014 09:41 PM)ToastyX Wrote:  

(01-14-2014 02:19 AM)Bklynnykid Wrote:  

(01-14-2014 01:56 AM)Bklynnykid Wrote:  Hi, I can get successfully get the resolution utility to work on my HD 6450, R 250 with my Dell U3011 monitor, however, HDMI audio no longer works when I set the resolution from 1920x1200 to 2560x1600 via HDMI. Anyone else experience this? The HD audio via HDMI works when I reset the CRU utility.

Ok, I got audio working via HDMI by importing the hdmi-audio.dat file and checking the "include extension block" option. My only issue is I can't get 5.1 audio. If I can get this fixed I'll be all set! Any thoughts? The Dell U3011 monitor supports 5.1 audio outputs.

Did you patch the driver or did it work without the patch?

With AMD cards, you should be able to use the monitor's default extension block. Did you try it with the default extension block enabled? Use the "Delete" button to remove the imported one.

If that doesn't work, then run reset-all.exe and reboot. Then run this program and give me the text file: http://devgurus.amd.com/servlet/JiveServ...ID-1.2.zip

Here are the steps I performed for my HD 6750:
(1) Created custom resolution, did not work with include extension block checked or unchecked (no hdmi-audio.dat import)
(2) Proceeded to patch the driver
(3) With extension block checked I get audio but not the custom resolution of 2560x1600 @60Hz
(4) Unchecked extension block and I get 2560x1600 without HDMI audio
(5) Import the hdmi-audio.dat file with I get 2560x1600 with Stereo audio only

File is attached. Thanks in advance for your help.


  bklynnykid-EDID.zip (Size: 1.26 KB / Downloads: 790)