Custom Resolution Utility (CRU)

[waldi2ger]

Hello,

sorry for my bad english but I use the Google translator.

Unfortunately, I can´t use the resolution 1920x1080 @ 110Hz and 1920x1200 @ 110Hz with the GPU scaling up in full screen mode. Do I use 96Hz I can let scale the two resolutions to full screen.

Monitor = qnix qx2710 evolution II
Graphic card = Gigabyte R9 280x
Driver = Catalyst Control Center 14.7

I once even made ​​a few tests. Here's what I've found out there.
With this setting at 110Hz, I can not use 1920x1080 resolution at 110Hz and full screen.
[Image: http://up.picr.de/18933254ms.jpg]
(Automatic - LCD standard)

In these settings it works.
[Image: http://up.picr.de/18933258ih.jpg]
(Manual)

With these settings, it also works.
[Image: http://up.picr.de/18933261ax.jpg]
(Automatic - LCD reduced)

I have now found out that not underclocks in the "Automatic LCD reduced" settings of the memory clock.

What can I do to 1920x1080 @ 110Hz to use with full screen and the graphics memory is clocked down now?