Custom Resolution Utility (CRU)

[bcec]

(11-04-2014 06:22 PM)ToastyX Wrote:  

(11-04-2014 05:27 PM)bcec Wrote:  When I use CRU to create custom resolution to solve the intermittent signal loss problem in my setup (htpc -> avr -> tv, see long version at avsforum), my audio becomes messed up. My desktop shows only 2.0 (vs 5.1), and I seem to be not getting DTS bitstreaming anymore.

EDIT: Is the correct solution to this the following: check "Include extension block" and then importing hdmi-bitstream.dat?

CRU uses EDID overrides, so if you've already installed an EDID override with an extension block, you don't need to import anything. If you haven't installed an EDID override, you can import the hdmi-bitstream.dat for bitstreaming with most HDMI A/V receivers, or you can import the avr.inf file that you made to import the receiver's extension block, but that might include resolutions that you might not want.

Thansk for the reply! Yes I started with an EDID override installed. With that EDID override, I have audio working fine, but video timings (front porch etc) are wrong.

So I used CRU to create custom resolutions with the correct timings, but the moment I do that and restart, my audio is killed (only getting 2.0 on desktop and bitstreaming doesn't work). Would you expect this to happen, or am I doing something completely wrong?