Custom Resolution Utility (CRU)

[TurboJLo]

(11-24-2014 04:49 PM)ToastyX Wrote:  Don't use the pixel clock patch with 2560x1080 monitors. 2560x1080 requires dual-link DVI, but the patch will make the video card send a single-link DVI signal at less than 230 MHz pixel clock. The patch is not needed with dual-link DVI unless you're trying to exceed 330 MHz pixel clock, which is not an issue at 2560x1080 unless you're trying to go beyond 100 Hz.

Ok so I removed the patch and NOTHING works. No DVI-D no HDMI. Redid your patch and HDMI with DVI-D adapter(on monitor) works.

Like I said above card is a brand new MSI 970 gaming. Monitor is a Crossover 290M (LG IPS panel like the Dell 29" 21:9 IIRC)

Not sure if matters but I am on a 35ft HDMI cable. Ordering a 35ft DP to HDMI and DP to DVI cable to see if that makes any difference...