|
Custom Resolution Utility (CRU)
|
|
04-29-2015, 10:27 PM
Post: #1368
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-29-2015 06:03 AM)EvilWiffles Wrote: I have a multi-monitor setup with two R9 270x's via HDMI. Technically, it isn't a multi-monitor setup because they are actually both TVs. Would this effect using CRU compatibility?TVs are monitors. They work the same way. (04-29-2015 06:03 AM)EvilWiffles Wrote: Secondly, I have tried getting CRU to work but no changes are ever made and no new resolutions are added to the list of screen resolutions. I've patched atikmdag but still no difference was made. I essentially want to run a higher refresh rate of 75 Hz.AMD's driver listens to the HDMI TMDS limit in the extension block. Try using a custom extension block. You shouldn't need the patch with HDMI if you add an HDMI support data block (the default settings are fine). Otherwise, HDMI will act like single-link DVI, which requires the patch beyond 165 MHz pixel clock. You might have to try both ways because the TV might accept 75 Hz one way and not the other. |
|||
|
|
« Next Oldest | Next Newest »
|