|
Custom Resolution Utility (CRU)
|
|
08-19-2015, 10:33 PM
(Last edited: 08-19-2015, 10:44 PM by nihilanth)
Post: #1579
|
|||
|
|||
|
RE: Custom Resolution Utility (CRU)
Greetings Mr Toasty,
Firstly, allow me to salute you on the making of this little program. Some great coding, there! Really helpful. Now, if you would be so kind as to help me out with my setup here: I simply cannot pass the 165MHz pixel clock when attempting a refresh rate overclock. I have already patched the AMD driver with your atikmdag-patcher but the problem persists: anything above 165MHz gives me a black screen with a "current input timing is not suported" message on the monitor. R9 290, catalyst 14.12 (got a different set of problems with 15), DELL S2740L monitor (1920x1080p@60Hz default), Win 8.1 Using a dual-link DVI cable (tried a single-link DVI cable, same output), tried the other DVI port on the vga, same output aswell. I managed to get 1920x1080p @ 75Hz (with reduced timings, to stay under 165MHz pixel clock), tested for frame-skipping ok. Anything above 165MHz, even @68Hz refresh, gives me the black screen with "current input timing is not suported" message. Any ideas? |
|||
|
|
« Next Oldest | Next Newest »
|