Custom Resolution Utility (CRU)
|
06-08-2013, 09:10 AM
(Last edited: 06-08-2013, 09:22 AM by andiih)
Post: #143
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(06-08-2013 07:45 AM)ToastyX Wrote:(06-08-2013 01:27 AM)andiih Wrote: I'm not sure what I'm missing here. I've got a shiny new 2560x1440 monitor which I'm trying to connect via HDMI, but I'm only able to select 1920x1080. I run CRU and 2560x1440@59.950Hz (241.5 MHz) appears in Detailed resolutions. I untick Include extension block, and reboot, but I still can't select anything about 1920x1080 from either the Win7 select resolution or the NVidia control panel (which is version 2.6.650.10)HDMI is limited to 165 MHz pixel clock. You might be able to get around that by adding a custom resolution using the NVIDIA control panel. If not, either the refresh rate has to be reduced to 40 Hz, or the driver has to be patched: https://www.monitortests.com/forum/Threa...ck-Patcher Thanks for the reply. Yep, its got the switchable graphics. Does that mean I'm totally borked? I tried a 40Hz refresh and that's not helped...not tried the patch yet. The intel utility sees only the internal settings, won't let me select external monitor or add a higher resolution, so I'm guessing that its not involved when I've got the switch on "Speed" |
|||
« Next Oldest | Next Newest »
|