Custom Resolution Utility (CRU)

[Korvan]

ASUS Crosshair V Formula-Z AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard with 3-Way SLI/CrossFireX Support and UEFI BIOS
HIS IceQ Boost Clock H795QC3G2M Radeon HD 7950 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card
AMD FX-8150 Zambezi 3.6GHz (3.9GHz/4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor with Liquid Cooling Kit FD8150FRGUWOX
ORSAIR Dominator Platinum 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 Desktop Memory Model CMD16GX3M2A2400C10
I followed the instructions here
Choose a display from the drop-down list.
"(active)" means the display is connected and the configuration is active.
"*" means changes were saved and an override is in effect.
Edit the configuration as desired.
The first detailed resolution is considered the preferred or native resolution. To make games use a higher refresh rate, define it as the first detailed resolution.
At least one detailed resolution should be defined. All other resolutions can be removed if they are not needed.
NVIDIA users must uncheck "Include extension block" to get custom resolutions to show up.
i followed these first though
Run atikmdag-patcher.exe.
If all the limits are found, click "Yes" to patch and sign. If a limit is not found or if multiple matches are found, the patcher needs to be updated.
64-bit only: enable test mode using testmode.exe if it isn't already enabled.
Reboot.
i did test mode then rebooted i get blue screen i have to restore each time i got it to work once but screen had lines going through it everywhere different color lines going left to right on desktop did not test game.
Any ideas would be great windows update and drivers up to date