Custom Resolution Utility (CRU)

[tester68]

(10-31-2015 02:11 PM)ToastyX Wrote:  

(10-31-2015 01:38 PM)tester68 Wrote:  I did try the deliner however that has the knock on effect of making some windows/images show even more lines.

Did you run reduce-contrast.exe?

(10-31-2015 01:38 PM)tester68 Wrote:  Could it be overcome with a better cable?

The lines are not a signal quality issue, so a better cable won't help. I think it's a limitation of the timing controller.

Thank you. I was getting some intermittent red line flickering in full screen games at 120hz. I tried a different cable and it seems to have settled down.

(10-31-2015 01:38 PM)tester68 Wrote:  Could I also try amending the CRU timings? I currently use 2704 / 1450. I have been told to try 2700 / 1444 however the text goes red when trying 1444.

That won't make much of a difference. I wouldn't go lower than 1445 because current AMD cards can't handle less than 5 vertical blanking.
The total includes the front porch + sync width + back porch, so you need to reduce the vertical front porch and sync width to 1 to set the total to 1445.

When I set the total to 1445, it auto adjusts the Vertical settings for me