Custom Resolution Utility (CRU)

[ToastyX]

(11-22-2015 10:13 AM)Marsh Wrote:  I've patched the pixel clock and without even having to use the CRU at all I can select the 100,120,144hz options that were previously not there but with trouble. One being that 144hz is not compatible whatsoever which I was not necessarily worried about because 120hz worked alright. Given that my monitor itself will prompt an "incorrect cable" error and repeatably do so when you exit it with the monitor button.

If you can't dismiss the message, then there's nothing you can do. The monitor is expecting a dual-link signal at 120 Hz, but you're sending it a single-link signal by using the patch. If you don't mind using a lower resolution, you can try adding 1440x810 @ 120 Hz. That's just under 165 MHz pixel clock with the "LCD standard" timing option.

(11-22-2015 10:13 AM)Marsh Wrote:  Lastly if the above can be solved I'm curious what I would need to use within CRU to achieve maximum performance. I haven't consistently played the game at 120hz enough with the error message to determine if there are any true stutters or freezes or whatever you would to call it while overclocked or if its my GFX itself. BTW my GFX itself runs well enough that I can achieve 150+ frames consistently to run the desired refresh rates.

Monitors don't stutter or freeze. Some monitors skip frames at anything other than 60 Hz, but that wouldn't apply to a 120 Hz monitor.