Custom Resolution Utility (CRU)
|
11-23-2015, 08:20 PM
Post: #1790
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(11-23-2015 06:31 PM)ToastyX Wrote:(11-22-2015 10:13 AM)Marsh Wrote: I've patched the pixel clock and without even having to use the CRU at all I can select the 100,120,144hz options that were previously not there but with trouble. One being that 144hz is not compatible whatsoever which I was not necessarily worried about because 120hz worked alright. Given that my monitor itself will prompt an "incorrect cable" error and repeatably do so when you exit it with the monitor button.If you can't dismiss the message, then there's nothing you can do. The monitor is expecting a dual-link signal at 120 Hz, but you're sending it a single-link signal by using the patch. If you don't mind using a lower resolution, you can try adding 1440x810 @ 120 Hz. That's just under 165 MHz pixel clock with the "LCD standard" timing option. Not being able to close the cable error is really bizarre on an Asus monitor. The Asus VG248QE gives the "incorrect cable" error also if you use the pixel clock patcher and patch the single link limits, and you use 1920x1080@85hz, but you can just press "Exit" and enter the OSD and the error won't appear again until you change resolutions. |
|||
« Next Oldest | Next Newest »
|