Custom Resolution Utility (CRU)

[sanmal]

(12-11-2015 05:08 AM)ToastyX Wrote:  

(12-10-2015 04:13 PM)sanmal Wrote:  work with all timings, its why i am sking:

Code:

1920x1080 @ 60.000 Hz (148.50 MHz) [+/+] <-default

1920x1080 @ 75.002 Hz (174.57 MHz) [+/-] <-standard
1920x1080 @ 75.002 Hz (185.63 MHz) [+/+] <-native
1920x1080 @ 75.001 Hz (164.61 MHz) [+/+] <-reduced

what of this more prefered for more stable (except default)?

Same for extension block, work with any of them.

Generally, the lower the pixel clock, the more stable the signal, but if it works, then it doesn't matter. The only issue is the video card might not clock down when idle with the "LCD reduced" option, but I don't know if that applies to the 8800GT. With DVI, you'll need the pixel clock patch if the pixel clock is greater than 165 MHz, but that doesn't matter with VGA. I don't know if the pixel clock patch works with the 8800GT.

If i right understand about video card clock down, then most of 8800GT always work with same clock (have one 9800GT with same).
Sorry, but i am little lie with timings (because i check them without driver restart , after restart use only native timing). Now check them all with restart and i have:

Code:

default-> 1920x1080 @ 60.000 Hz (148.50 MHz) [+/+] ->Eizo moire test 7/24-9/24 have horizontal waves/lines

standard-> 1920x1080 @ 75.002 Hz (174.57 MHz) [+/-] ->Eizo moire test 7/24-9/24 have horizontal waves/lines
native-> 1920x1080 @ 75.002 Hz (185.63 MHz) [+/+] ->Clear in tests (!!!)
reduced-> 1920x1080 @ 75.001 Hz (164.61 MHz) [+/+] ->Wrong picture

well, for normal picture optimal only native with 185.63 MHz.
Monitor and VC support DVI-D, and i bought double-link, just will recive it after 15 Dec. From description i understan what with DVI-D all must be ok without patch.
Thanks! Have only 1 last question in this time. In NVIDIA Pixel Clock Patcher thread

Quote:Compatibility:
Test mode is not required anymore. Test mode can be disabled using this: testmode.zip

what is "Test mode"?