Custom Resolution Utility (CRU)

[ToastyX]

(12-16-2015 06:07 PM)sanmal Wrote:  Wait. With VGA it can 165+, with DVI not. For other user it work with same monitor + HDMI/Win10 64/R9 280X. Problem not in monitor.

DVI is not the same as VGA or HDMI. There's no guarantee that the monitor will support the same refresh rates on all the inputs. Does your monitor have HDMI? You might need to use a DVI-HDMI cable instead. To send an HDMI signal, you need to add an HDMI support data block in the custom extension block.

(12-17-2015 12:38 AM)sanmal Wrote:  Heh. Just remove patch.
Exacly CVT-RB in Nvidia(or standard in CRU)-> 1920x1080@75Hz (174.57 MHz) -> black screen or Input not supported.
Native or random 165+MHz->broken picture.
Dont know what do this "patch", but mb my monitor rly not support 165+MHz on DVI or i am something not understand

If "LCD native" shows a broken picture without the patch but shows "Input not supported" with the patch, then the patch is working and your monitor doesn't support the resolution or the timing parameters. Try "LCD reduced" with 72-74 Hz. That's more likely to work and doesn't need the patch.