Custom Resolution Utility (CRU)

[ToastyX]

(09-28-2016 12:08 PM)Lewd Wrote:  Separately (Eyefinity disabled etc), the VW222S only propose 1600x1200 (I don't know why). I've tried to add 1680x1080 60Hz to each screen as detailed res, in order to obtain 4800x1080 with Eyefinity, and two different results come out of it after restart : 80% of the time, VW222S turns black while the other screens are ok (with 1680x1080 added) / 20% of the time, 248H & 247H turn black and 222S keeps working, except when I try to choose the new added 1680x1080, he turns black and the two other screens become operational again.

I also tried to just add 1680x1050 60Hz to the 222S (as 248/247 already propose that res), but same issue. Have tried another DP port etc...

In a word, I can't obtain all screens operationnal with 1680x1080/1050 added.

Make the first detailed resolution the resolution you want to use with Eyefinity.

Here's what I would do: have two detailed resolutions only, one for 1920x1080 @ 60 Hz and one for 1680x1050 @ 60 Hz. Use "LCD standard" for both. Remove all the other resolutions, and set the extension block to custom extension block. That way those will be the only two resolutions available. Do this for all three monitors.

First, try making 1920x1080 the first detailed resolultion for all three monitors. The VW222S might be able to scale down 1920x1080. If not, make 1680x1050 the first detailed resolution for all three monitors. Then try setting up Eyefinity.