Custom Resolution Utility (CRU)

[KEALHOVIK]

(11-26-2016 07:29 PM)ToastyX Wrote:  Your posts are very confusing and it's frustrating me. First you said you overclocked using the NVIDIA control panel, so I thought you meant the problem only happened with CRU. Does the problem happen if you only use the NVIDIA control panel?

You said you used CRU so you can use DSR, so I said make sure the resolution you want for DSR is the first detailed resolution. Then you said there is no problem with DSR. So the problem only happens when DSR is off?

What do you mean now there is none on 60? Were there artifacts at 60 Hz before? You only said there were artifacts after the video card switches to 87 Hz. Then you said it works with 87 Hz, but if you turn on some "strange resolution" at 60 Hz, then you see artifacts in Windows. What is a strange resolution? Now you're saying the opposite, that before if you switch to 60 and back to 87, the artifacts were gone. I have no idea what you're saying at this point.

Then I said make 87 Hz the first detailed resolution, and get rid of all the other resolutions, but your screenshot shows you didn't do this. You have 1920x1080 @ 60 Hz in there twice. Get rid of all the established and standard resolutions just to make sure the driver isn't mixing up any other resolutions. Just have 87 Hz and 60 Hz as detailed resolutions.

If the problem still happens after that, try a lower refresh rate like 85 Hz or 75 Hz.

Oh it seems to work now!

Sorry about confusion.
I only used NVIDIA Control Panel to get the numbers for CRU, then i never used custom resolutions through NVIDIA Control Panel. For all tests after i found this issue i turned off DSR (so issue present with or without it).
About 60Hz: when i have default timing on 60 and custom on 87 i can get rid of artifacts by witching to 60 and back to 87; if i have custom timing on both 60 and 87 this trick doesn't work. By strange resolution i meant one with not 16:9 ratio (cause i only had option to test it with XIII and dosbox, but then i find out that in gta 5 i can turn on something line 1680x1050 at 60 and issue gonna be triggered again).

Screenshot shows the setting i settled with after trying everything you said... well i guess everything except i forget to set 87Hz as my first detailed resolution (or i set it when tv resolutions was on), because now i tried setting 87 as firs detailed and deleting everything except 60 and it works.

Thank you for help and great software!!!