Custom Resolution Utility (CRU)

[ToastyX]

(05-15-2017 12:26 PM)BetaCarotine Wrote:  I m curious since I have read that increasing the freesync range can actually permanently damage your panel. What would be the maximum possibly for the MG279Q. I have read that since the standard range is 35-90 that is a factor of 2.57 that setting it to 56-144 freesync range would be acceptable.
But I heard others say that they onyl use 74-144 because they are afraid of damaging the Panel.
So I m wondering if someone could shed light on this or if they are using a 56-144 range for a couple of years without problems
Right now I m still at the default range of 35-90, but would like to change it!

I don't see how it could damage the monitor. The monitor is already capable of those refresh rates. The range should be at least 2.5x for LFC (Low Framerate Compensation) to work smoothly.