Custom Resolution Utility (CRU)

[ToastyX]

(12-21-2017 04:03 PM)djsolidsnake86 Wrote:  Hi to all, i have a 1060gtx and i connect it to a samsung monitor via hdmi and to a panasonic plasma via dvi-to-hdmi connector
the problem is that if i clone the 2 monitors, in the plasma the gamma is darker, if i disable samsung monitor and use only plasma the gamma is default so no problem
how can i fix this problem when using clone mode?
i found that the monitor that i set to primary has the correct colours, the monitor that i set to secondary has the darker gamma

now i used cru for delete block extension in both monitor but problem still remain!

I don't know. That sounds like a driver issue with limited range vs. full range RGB. You should be able to set the colors for each monitor, but the driver might not be doing it right in clone mode. Try using "LCD reduced" and see if the colors are different that way. You might be better off using a splitter instead.