Custom Resolution Utility (CRU)

[JayCee]

(09-07-2013 09:14 AM)ToastyX Wrote:  It's not the same. 1920x1200 monitors are not usually good overclockers. If "LCD standard" and "LCD reduced" won't even display a picture, then it probably can't be done.

Someone mentioned that the U2312HM is limited to around 165 MHz pixel clock even with DisplayPort. If the U2412M works the same way, then there's no way to get 1920x1200 @ 72 Hz.

Thanks for the response. I did some testing at 61Hz and worked my way up with CRU. The maximum refresh rate I could get was 62Hz with standard LCD settings. Strangely, 63 and above, even with lower timings and staying under 165MHz, did not work. The cutoff in my case was closer to 160MHz.