Custom Resolution Utility (CRU)
|
06-23-2019, 03:40 PM
Post: #4075
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(06-12-2019 05:01 PM)ToastyX Wrote: The driver is not handling EDID overrides correctly. Export a file from CRU and post it here. I will see if I can create an alternative method that works with Intel. Just FYI I finally found a solution for the current Intel DCH drivers (tested with 26.20.100.6912 on my Surface Go). Under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\SHP14A6 there were two keys that referred to the same display, one with the EDID_OVERRIDE key (presumably added by CRU) and one without. So I copied everything in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\SHP14A6\4&3291bf54&0&UID265988\Device Parameters\EDID_OVERRIDE to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\SHP14A6\1&8713bca&0&UID0\Device Parameters\EDID_OVERRIDE and rebooted, and afterwards my custom resolutions were again shown and usable in Windows display settings. This is a relief as it looks like the DCH drivers are required for Windows 10 1903, the legacy drivers no longer have a control panel on this version. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 129 Guest(s)