Custom Resolution Utility (CRU)

[Ambro]

(11-02-2019 07:04 PM)ToastyX Wrote:  

(11-02-2019 05:32 PM)Ambro Wrote:  The monitor I changed the timings on now only has 60, 100, and 120hz available. When I check the monitor timings in CRU, they still reflect settings that I applied post running reset-all and DDU, so it appears as if those settings persist in the monitor somehow. I did use your export feature in the application, but when I import them back it doesn't seem to have any effect on the timings. I'm fairly confident the issue is that I cannot revert back to the timings for this monitor which differed from my primary monitor. I'm able to use 144hz at 1920x1080, but my native resolution, 2560x1440 only allows 120hz now. The primary monitor runs in 144hz @ 2560x1440.

Another strange abnormality on this monitor now, the output color format is now set to YCbCr422 for both 100 and 120hz, with no option for RGB. It will only go back to RGB mode for 60hz. This doesn't happen with the primary monitor.

Are the monitors BenQ XL2730? Are the monitors connected using DisplayPort or HDMI? What video card to you have?

Run reset-all.exe and reboot. Then export each monitor to a file and post them here, and post the file you saved before making any changes.

Both monitors are the BenQ XL2730 and are both connected via display port to an EVGA 1070 FTW running the latest 441.08 driver. I tried switching out the DP cable, both are certified, no effect there. I also tried unplugging my primary monitor, leaving only the secondary plugged in, and tried switching the DP positions on the graphics card.

I've done as you've instructed - both sets of files are included as attachments to this thread. Thank you for taking the time to help me troubleshoot this issue.