Custom Resolution Utility (CRU)

[benoe]

(02-15-2020 07:31 AM)joevt Wrote:  HDMI and DisplayPort connections have different EDIDs. Are you looking at the DisplayPort EDID or the HDMI EDID (they might have different product IDs)?
Double-check the EDIDs in Monitor Asset Manager (moninfo.exe).

I have attached the moninfo output with displayport connected.

(02-15-2020 07:31 AM)joevt Wrote:  The display is not using a standard timing because it won't fit in the allowed range 330 MHz max (CRU should probably rename the timings to GTF, CVT, CVT-RB, CVT-RB2 so we know what standard is being used - 1920x1080 144Hz 346 MHz is CVT-RB).

If the EDID comes with a 144 Hz timing using 325 MHz, then why are you creating another timing using 346 MHz?

My goal is to make my radeon card lower it's memory clock rate when idle by increasing the vertical blanking lines. This increases pixel clock.