P2414H after OC problem.

[donger]

(03-17-2015 11:37 AM)ToastyX Wrote:  If the driver were crashing, Windows should tell you. Either the monitor can't handle the timing parameters, or there's a signal quality issue. If you're using DisplayPort, it could be interference from a nearby device like a cell phone, or it could be a bad cable.

I overclocked it to 72hz by adding 72hz to standard resolutions so no timings were changed. I will check with another cable BUT i spotted something intresting. After like 50th turnoff there appeared a window from dell display manager with something called "dell smart video enhance". I was able to turn it off. Strange thing, there is no such option in the dell DM itself so i have no idea how to go back to that window. I think there is some kind of software bug that kicks this Smart garbage in and that's why the display goes black once in a while.

I will report if it is still going black after turning it off.

As you can see i am not the only one with this problem but there are 0 answers on google, just the problem description.
https://www.google.pl/webhp?sourceid=chr...urns%20off

Meh it still goes black...