NVIDIA Pixel Clock Patcher

[Riadon]

(06-14-2016 01:56 AM)GD7G Wrote:  

(05-28-2016 07:00 PM)ToastyX Wrote:  Here it is: https://www.monitortests.com/nvlddmkm-patcher-1.3.7.zip

I have a GTX 1080 and was able to oc to 96hz no problem, however until upon restarting my pc, I get a black screen. I have found my hard limit to be 80hz without getting the black screen upon wake. I used this pixel patch, drivers 368.25 and 368.39. I first tried CRU but it didn't create a new res choice in windows so I ended up making the custom resolution in NVCP. This is a qnix 2710 with d-dvi. My previous card was AMD and it OC'd the same monitor to 96hz no problem. Any ideas?

I have the same problem, and the same monitor.

I have a GTX 1070 and I am locked to 80 Hz (maybe I could hit 81 Hz, but I haven't tried).

I can easily overclock to 120 Hz stable after I am loaded into windows, but if my refresh rate is any higher than 80 Hz when I load into Windows, I get eternal flashing colors on my QNIX in place of the welcome screen.

I get the same result without the patch, with the normal patch, and with the full patch. Without the QNIX monitor driver, and with.

I'm assuming I could set the monitor to 81 Hz, but the second I set it to 82 Hz (330.3222 pixel clock), I can't boot. This leads me to believe that there is a DL-DVI driver issue with Pascal when clocking above 330 MHz that isn't addressed with the patcher.

Also, my friend with the same monitor and a GTX 1080 has the exact same problem. However, for some reason, if he spams a random key on his keyboard or moves his mouse around a bit before the flashing screen appears, he is able to boot into windows. However, if he doesn't touch his mouse or keyboard, he gets the screen. This doesn't work for me, however. The only reason I could see that it works for him and not me is because he has an MSI motherboard and I have an ASUS, but that's just a shot in the dark.

I'm willing to do as much as is needed to help fix this problem if I am able