Can't seem to get any resolution over 2880x1620 to work

[ToastyX]

(01-22-2017 07:20 PM)Berke53 Wrote:  I don't quite remember deleting it as I did a full reset and just added the detailed resolutions before uploading the profile.

It doesn't look like a full reset with just the detailed resolutions. It looks like you imported an old hdmi-audio.dat file, which replaces the extension block. How did you do the reset?

(01-22-2017 07:20 PM)Berke53 Wrote:  I Added the HDMI 2.0 block manually and now the resolutions above 1620p show up! However when i try to select them the screen goes blank with no signal message. Also when trying ycbcr 422. Very strange. Without CRU i am able to display UHD 60 4:4:4. I'm quite sure no color compression is applied using default EDID. Any recommendations what I can try next?

For 3840x2160 @ 60 Hz, you need to use the "LCD native" timing parameters. It looks like you used the "LCD reduced" option, which probably won't work with a TV. The TV should have already defined this resolution by default, although maybe it was in the extension block. For the other detailed resolutions, all the LCD timing options are the same, so they shouldn't be affected. 3200x1800 should work unless the TV doesn't support it.