Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can't seem to get any resolution over 2880x1620 to work
01-11-2017, 08:01 PM (This post was last modified: 01-11-2017 08:03 PM by Berke53.)
Post: #1
Information Can't seem to get any resolution over 2880x1620 to work
Whatever I try i can't seem to get any resolution over 2880x1620 to work without color compression or reducing refresh rate.
I'm using CRU 1.3 with 2 GTX 1080 GPU's in SLI and a Sony KD55x8509C UHD TV wich both support 4K resolution @ 60hz 4:4:4 chroma.
Reducing refresh rate to 30hz or forcing 4:2:0 chroma subsampling works
So... you would think that the HDMI cable is to long or has poor build quality to transfer the signal correctly.
Well..the weired thing is that 40k 60hz 4:4:4 works perfectly without using the CRU utility. (tested using various chroma subsampling testpaterns) So why does CRU fails to achieve these resolutions?

I would like to set up all resolutions like 1440p, 1620p 1800p and 2160p. Without using CRU i only get standard 1080p, 1440p and 2160p. With the usage of CRU I can get 1080p, 1440p and 1620p but no 1800p and 2160p without color compression. The Standard EDID UHD resolution simply dissapears by using CRU.
I tested the hell out of the CRU application. Putting these resolutions in all possible locations and extention blocks without any result.

Does sombody has any idea what is going on here?

(TV is updated to latest firmware and is set up for enhanced HDMI singnals)

Any help would be greatly appreciated! Smile
Find all posts by this user
Quote this message in a reply
01-13-2017, 01:12 AM
Post: #2
RE: Can't seem to get any resolution over 2880x1620 to work
Export a file and post it so I can take a look.
Find all posts by this user
Quote this message in a reply
01-15-2017, 08:59 PM
Post: #3
RE: Can't seem to get any resolution over 2880x1620 to work
(01-13-2017 01:12 AM)ToastyX Wrote:  Export a file and post it so I can take a look.

Thank you for your time!

I posted an exported profile. I already experimented quite a lot to achieve some results but everything fails. I can't seem to get 1800p or 2160p resolutions without color compression. Tried reducing timings even further. Tried setting the desired resolutions in a custom extention block. Setting as a TV resolution. Nothing works.

Without CRU I can achieve 4k60 4:4:4. The resolution can be seen under the 'HD resolutions group' in the nvidia control panel. When using CRU. The HD resolutions are gone. Only PC resolutions up until 1620p.

I hope a solution can be found Smile

Thanks in advance!


Attached File(s)
.bin  Profile2.bin (Size: 256 bytes / Downloads: 6)
Find all posts by this user
Quote this message in a reply
01-16-2017, 07:29 PM
Post: #4
RE: Can't seem to get any resolution over 2880x1620 to work
That file is for the ASUS PG348Q.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)