Threaded Mode | Linear Mode

***ToastyX*** · 06-10-2023, 03:39 AM

(06-09-2023 02:48 AM)pakos2835 Wrote: now i encountering the issue with 1366*768 installation. params used for all other resolutions, from default monitor node (CRU string 1280*1024/60), seems isnt applicable here - i receive monitor window box "wrong sync data" and monitor going off

what right parameters should I use for 1366*768/60, i need this mode for terminal laptop usage with pc via remote desktop, currently i am using a resolution of 1366*768 with the pc monitor turned off

all other custom resolutions 16-9 and 4-3 is work fine

I wouldn't expect a 1280x1024 monitor to accept 1366x768. That's wider than the native resolution.

codepltn · 06-10-2023, 04:51 PM

(06-08-2023 10:40 PM)ToastyX Wrote:
(06-08-2023 03:27 PM)codepltn Wrote: Dear friends, My laptop supports up to 300hz but currently it show only 2 options like 60.12 and 300.44 and I think these numbers are the main reason for some horizontal lines at the bottom of my monitor.

When I change the resolution one to another it fixes it but should I correct the numbers as 60 and 300?

P.S. I can't select 300 as a custom from CRU why and how can I do that? Thank you

My PC: Rtx3060 1920×1080 17.3" laptop.
I don't understand what you're saying. Refresh rates don't need to be integers. That wouldn't cause horizontal lines to appear.

Thanks for the answer. May I change the HZ to 300 from CRU? I didn't manage to do that how may I do that?

bali50 · 06-12-2023, 09:28 PM

(06-08-2023 10:37 PM)ToastyX Wrote:
(06-03-2023 06:15 PM)bali50 Wrote: Hi. I've got a spare 65" 4k tv (3840 x 2160 px) that is slightly damaged in the bottom part of the screen only, and rather than dispose of it or sell it for peanuts, I want to use it as a desk monitor, so that only the top 1600 px or so is used by the operating system and the bottom pixels are unused (as screen damaged there). I have it sitting on a stand behind my desk and is already lowered so that only the top part of the telly is above desk height. I would like the windows taskbar to be at desk height which is 1600px from the top of the screen.
I found out about ToastyX on Google, but I have no advanced knowledge of graphics cards and the inner working of monitors etc., so I'm a bit nervous of bricking my monitor. Can ToastyX achieve what I need, and if so, how could I blank off the bottom x number of pixel rows off my screen? Any help would be much appreciated (via Patreon also).
I don't know of a way to use only part of the screen other than centering the image.

Aw, ok. I was hoping there was a way. And so do quite a few others on the net by the looks of things! Thanks for letting me know...

xjanx · 06-16-2023, 08:33 AM

I only found the tool today I used it to increase the refresh rate from 60hz to 120hz for QHD resolution (2560*1440).
It is an AOC 4k/60hz (aoc u2790pqu).
It shows in the windows settings and in the AMD driver software that it is running with 120hz now.

So is it really true, that it is running with 120hz now?
And does this mean I don't really need a gaming screen if I only want more refresh rate?
I kind of still can't believe it which is why I'm asking ^^

***ToastyX*** · 06-18-2023, 04:08 PM

(06-16-2023 08:33 AM)xjanx Wrote: I only found the tool today I used it to increase the refresh rate from 60hz to 120hz for QHD resolution (2560*1440).
It is an AOC 4k/60hz (aoc u2790pqu).
It shows in the windows settings and in the AMD driver software that it is running with 120hz now.

So is it really true, that it is running with 120hz now?
And does this mean I don't really need a gaming screen if I only want more refresh rate?
I kind of still can't believe it which is why I'm asking ^^

You shouldn't need to ask that. The difference should be obvious just by moving the mouse if it is true.

Xii-Nyth · 06-20-2023, 01:12 AM

Hey Toasty, is this a know issue?

On the newest nvidia driver with the newest cru, the display settings area in nvidia control panel is hidden after making changes and restarting.

There are a few things I was using cru for, but the main ones are removing the useless 4096x2160 resolution that shows up on all 4k tvs, as it messes up a few things, and enabling 24 bit pcm audio, since things get confused when I passthough from my tv to my receiver.

Broutoulou · 06-21-2023, 02:01 AM

Hi!
I've just bought a used laptop. It's a Honor Magicbook Pro with a MX350 and a I5 10210U. It is using Nvidia Optimus. Apparently, my HDMI is locked at 300Mhz, just like it says on your description "Intel GPUs without HDMI 2.0 support up to 300.99 MHz.". It seems that my computer has a HDMI 1.4, 1 USB-C that is NOT thunderbolt, and 3 USB 3.2 Gen1. So, I would like to know if there is any way to get 1080P 144Hz output (maybe with an USB-C -> DP adapter ?). Thanks for reading my comment, and sorry for my bad english. Also, i'm not sure if this is the right place to ask that, so sorry.

pakos2835 · (Last edited: 06-21-2023, 10:56 AM by pakos2835)

(06-10-2023 03:39 AM)ToastyX Wrote:
(06-09-2023 02:48 AM)pakos2835 Wrote: now i encountering the issue with 1366*768 installation. params used for all other resolutions, from default monitor node (CRU string 1280*1024/60), seems isnt applicable here - i receive monitor window box "wrong sync data" and monitor going off

what right parameters should I use for 1366*768/60, i need this mode for terminal laptop usage with pc via remote desktop, currently i am using a resolution of 1366*768 with the pc monitor turned off

all other custom resolutions 16-9 and 4-3 is work fine
I wouldn't expect a 1280x1024 monitor to accept 1366x768. That's wider than the native resolution.

huh, but 1920x1080 is wider too, but works fine,
i dont think its about number of pixels, because the gpu and monitor have internal scalers\mixers

zarusoba10 · 06-22-2023, 02:48 PM

I only have an SDR display, but I found this tool to see how HDR behaves in games.

However, even if I edit the EDID with this tool, win10 doesn't seem to recognize the HDR metadata. Data other than HDR, such as refresh rate, could be changed.

Is there a bug in HDR?

codepltn · 06-26-2023, 09:08 AM

(06-10-2023 04:51 PM)codepltn Wrote:
(06-08-2023 10:40 PM)ToastyX Wrote:
(06-08-2023 03:27 PM)codepltn Wrote: Dear friends, My laptop supports up to 300hz but currently it show only 2 options like 60.12 and 300.44 and I think these numbers are the main reason for some horizontal lines at the bottom of my monitor.

When I change the resolution one to another it fixes it but should I correct the numbers as 60 and 300?

P.S. I can't select 300 as a custom from CRU why and how can I do that? Thank you

My PC: Rtx3060 1920×1080 17.3" laptop.
I don't understand what you're saying. Refresh rates don't need to be integers. That wouldn't cause horizontal lines to appear.

Thanks for the answer. May I change the HZ to 300 from CRU? I didn't manage to do that how may I do that?

My monitor supports it btw