Custom Resolution Utility (CRU)
|
09-22-2024, 08:28 PM
(Last edited: 09-30-2024, 09:49 PM by ikonomov)
Post: #8491
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
As a continuation to my previous post, out of curiosity I decided to dig a bit more looking for further discussion on potential issues with such low timings. Testing for these showed no such problems on the XG27UCS monitor.
No issues with frame skipping (likely only a problem with older monitors): https://forums.blurbusters.com/viewtopic...205#p91601 No noticeable change to inverse ghosting, perhaps helped by the well tuned variable overdrive settings of this monitor: https://forums.blurbusters.com/viewtopic...664#p86652 Using lower vertical blanking should have practically imperceivable effect on input lag at 158Hz. I tried to detect some difference compared to using CVT-RB2 timings or increased vertical totals which I can get at 1080p/160Hz, but if there is a difference I can't tell without a measuring tool: https://forums.blurbusters.com/viewtopic...501#p97907 Some futher tests here. |
|||
09-23-2024, 10:23 PM
(Last edited: 09-23-2024, 10:24 PM by ninjabyte587)
Post: #8492
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
windows 11 24h2 seems to have changed something; i cant get my refresh rate to only remain 180hz
|
|||
09-24-2024, 12:12 AM
(Last edited: 09-24-2024, 12:26 AM by funkerwolf)
Post: #8493
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
Good night, am I the only one who noticed that after version 32.0.101.5768 there is no more monitor overclocking on 11th generation Intel integrated graphics? I can't set 75 hertz on my resolution 1920x1200, tried all options, only rollback to 32.0.101.5768 helps.
MoBo MSi B560M PRO-VDH - latest bios CPu Intel Core i5-11500 Lenovo ThinkVision T23d-10 - hdmi link Windows 11 24h2 26100.1876 The problem appeared since version 32.0.101.5971 |
|||
09-24-2024, 01:52 AM
Post: #8494
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(09-24-2024 12:12 AM)funkerwolf Wrote: Good night, am I the only one who noticed that after version 32.0.101.5768 there is no more monitor overclocking on 11th generation Intel integrated graphics? I can't set 75 hertz on my resolution 1920x1200, tried all options, only rollback to 32.0.101.5768 helps.Is there an HDMI data block in the CTA-861 extension block? If not, the pixel clock will be limited to 165 MHz. If there is an HDMI data block, is the max TMDS clock higher than the pixel clock for the custom refresh rate? If not, the driver might ignore the custom refresh rate. Ideally it should be set to 340 MHz for HDMI 1.4. |
|||
09-24-2024, 01:53 AM
Post: #8495
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(09-23-2024 10:23 PM)ninjabyte587 Wrote: windows 11 24h2 seems to have changed something; i cant get my refresh rate to only remain 180hzWhat GPU? What data blocks are in the extension block? |
|||
09-24-2024, 10:20 AM
(Last edited: 09-24-2024, 10:50 AM by ninjabyte587)
Post: #8496
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(09-24-2024 01:53 AM)ToastyX Wrote:(09-23-2024 10:23 PM)ninjabyte587 Wrote: windows 11 24h2 seems to have changed something; i cant get my refresh rate to only remain 180hzWhat GPU? What data blocks are in the extension block? Nvidia 4060 here's the extension blocks: https://i.imgur.com/52vpnmr.png could it be related to this feature in display? https://i.imgur.com/jy1J9YE.png i have to point out that nvidia control panel reports the correct thing (only 180hz refresh rate) |
|||
09-24-2024, 02:43 PM
Post: #8497
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
Hi,
Apart from settings a higher refresh rate or messing with timing, etc. Can CRU physically damage a monitor? Like corrupt the EDID of a monitor and do irreversible changes? Thanks I'm thinking to use it to "delete" some unused resolution on my Aorus OLED 1440p monitor. |
|||
09-24-2024, 02:55 PM
Post: #8498
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(09-24-2024 02:43 PM)mahanddeem Wrote: Hi,No, CRU doesn't modify anything on the monitor. |
|||
09-24-2024, 02:55 PM
Post: #8499
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(09-24-2024 10:20 AM)ninjabyte587 Wrote: Nvidia 4060 here's the extension blocks:Does disabling variable refresh rate in the Windows graphics settings make any difference? |
|||
09-24-2024, 09:53 PM
Post: #8500
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(09-24-2024 02:55 PM)ToastyX Wrote:I reverted back to 23h2(09-24-2024 10:20 AM)ninjabyte587 Wrote: Nvidia 4060 here's the extension blocks:Does disabling variable refresh rate in the Windows graphics settings make any difference? |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 46 Guest(s)