Post Reply
Custom Resolution Utility (CRU)
11-25-2024, 07:02 PM
Post: #8611
RE: Custom Resolution Utility (CRU)
(11-25-2024 03:26 PM)ToastyX Wrote:  
(11-25-2024 01:42 PM)willianwojcik Wrote:  Right, 556.12, the last one that is scaling perfectly with DLDSR

I do two things to make it work. I pull up the 3840x1600 resolution to the first place in the "Detailed resolutions (2 slots left)" tab. Necessary to appear as native on the NVIDIA panel, otherwise the 2560x1080 resolution will appear as native, scaling incorrectly in the DSR. If you don't do this simple 1 second step, it won't work.

In the "Extension Block", "TV Resolutions" tab, I delete all 4096x2160 resolutions

In the "HDMI Support" tab, I do the same

That's all, I click on "restart64" and everything works as it should

https://imgur.com/a/MFzoJTs
Export a file from CRU.

Okay, done

It created a bin file, correct?

How can I send it to you?

Thanks
Find all posts by this user
Quote this message in a reply
11-25-2024, 07:19 PM
Post: #8612
RE: Custom Resolution Utility (CRU)
(11-25-2024 07:02 PM)willianwojcik Wrote:  Okay, done

It created a bin file, correct?

How can I send it to you?

Thanks
Any format is fine. You can upload it as an attachment here.
Find all posts by this user
Quote this message in a reply
11-25-2024, 08:45 PM
Post: #8613
RE: Custom Resolution Utility (CRU)
(11-25-2024 07:19 PM)ToastyX Wrote:  
(11-25-2024 07:02 PM)willianwojcik Wrote:  Okay, done

It created a bin file, correct?

How can I send it to you?

Thanks
Any format is fine. You can upload it as an attachment here.

Done!

Thanks


Attached File(s)
.bin  CRU.bin (Size: 256 bytes / Downloads: 23)
Find all posts by this user
Quote this message in a reply
11-25-2024, 09:54 PM
Post: #8614
RE: Custom Resolution Utility (CRU)
(11-25-2024 08:45 PM)willianwojcik Wrote:  Done!

Thanks
I don't see 3840x1600 @ 120 Hz anywhere. Only 60 Hz.
Find all posts by this user
Quote this message in a reply
11-25-2024, 11:02 PM
Post: #8615
RE: Custom Resolution Utility (CRU)
(11-25-2024 09:54 PM)ToastyX Wrote:  
(11-25-2024 08:45 PM)willianwojcik Wrote:  Done!

Thanks
I don't see 3840x1600 @ 120 Hz anywhere. Only 60 Hz.

From the beginning, when I use the C2's 21:9 ultrawide, the native resolution that appears on the NVIDIA panel is 2560x1080, not scaling correctly with DLDSR

To display 3840x1600 as native, you need to select the 3840x1600 resolution first in the "Detailed resolutions (2 slots left)" tab. Just pull it up and leave it as the first one, instead of 2560x1080. Nothing more

Doing this in CRU after 556.12 driver, the 3840x1600 is stuck at 60Hz

When I contacted NVIDIA, they initially told me it was a bug in the driver, but so far no solution, no answers

Strange isn't it? I don't know what to do to fix it

I found some people with the same problem on Reddit, with no solution. They tried everything

Thanks
Find all posts by this user
Quote this message in a reply
11-25-2024, 11:30 PM
Post: #8616
RE: Custom Resolution Utility (CRU)
(11-25-2024 11:02 PM)willianwojcik Wrote:  From the beginning, when I use the C2's 21:9 ultrawide, the native resolution that appears on the NVIDIA panel is 2560x1080, not scaling correctly with DLDSR

To display 3840x1600 as native, you need to select the 3840x1600 resolution first in the "Detailed resolutions (2 slots left)" tab. Just pull it up and leave it as the first one, instead of 2560x1080. Nothing more

Doing this in CRU after 556.12 driver, the 3840x1600 is stuck at 60Hz

When I contacted NVIDIA, they initially told me it was a bug in the driver, but so far no solution, no answers

Strange isn't it? I don't know what to do to fix it
So did you try adding 3840x1600 @ 120 Hz or not? I said to do that three months ago, but you never confirmed if that worked. The behavior you described is incorrect. Just making 3840x1600 @ 60 Hz the first detailed resolution would only make 60 Hz available for DSR. You also need to add 3840x1600 @ 120 Hz separately if you want 120 Hz for DSR. Whatever was happening before doesn't make sense because without 3840x1600 @ 120 Hz defined, the driver would have to scale to 3840x2160 @ 120 Hz instead. Check the active signal resolution in the Windows advanced display settings.
Find all posts by this user
Quote this message in a reply
11-26-2024, 12:17 AM (Last edited: 11-26-2024, 12:25 AM by willianwojcik)
Post: #8617
RE: Custom Resolution Utility (CRU)
(11-25-2024 11:30 PM)ToastyX Wrote:  
(11-25-2024 11:02 PM)willianwojcik Wrote:  From the beginning, when I use the C2's 21:9 ultrawide, the native resolution that appears on the NVIDIA panel is 2560x1080, not scaling correctly with DLDSR

To display 3840x1600 as native, you need to select the 3840x1600 resolution first in the "Detailed resolutions (2 slots left)" tab. Just pull it up and leave it as the first one, instead of 2560x1080. Nothing more

Doing this in CRU after 556.12 driver, the 3840x1600 is stuck at 60Hz

When I contacted NVIDIA, they initially told me it was a bug in the driver, but so far no solution, no answers

Strange isn't it? I don't know what to do to fix it
So did you try adding 3840x1600 @ 120 Hz or not? I said to do that three months ago, but you never confirmed if that worked. The behavior you described is incorrect. Just making 3840x1600 @ 60 Hz the first detailed resolution would only make 60 Hz available for DSR. You also need to add 3840x1600 @ 120 Hz separately if you want 120 Hz for DSR. Whatever was happening before doesn't make sense because without 3840x1600 @ 120 Hz defined, the driver would have to scale to 3840x2160 @ 120 Hz instead. Check the active signal resolution in the Windows advanced display settings.

I apologize if I didn't answer you, but I think I tried, it didn't work

It actually appears in red when I type 120Hz

Or am I doing something wrong? In the "Detailed resolutions (2 slots remaining)" tab, correct?

I forgot to send the link

https://www.reddit.com/r/OLED_Gaming/com..._219_mode/
Find all posts by this user
Quote this message in a reply
11-26-2024, 12:47 AM
Post: #8618
RE: Custom Resolution Utility (CRU)
(11-26-2024 12:17 AM)willianwojcik Wrote:  I apologize if I didn't answer you, but I think I tried, it didn't work

It actually appears in red when I type 120Hz

Or am I doing something wrong? In the "Detailed resolutions (2 slots remaining)" tab, correct?

I forgot to send the link

https://www.reddit.com/r/OLED_Gaming/com..._219_mode/
Read the first post. You need to use a DisplayID extension block. You definitely didn't add 120 Hz if you're asking this.
Find all posts by this user
Quote this message in a reply
11-26-2024, 01:13 AM
Post: #8619
RE: Custom Resolution Utility (CRU)
(11-26-2024 12:47 AM)ToastyX Wrote:  
(11-26-2024 12:17 AM)willianwojcik Wrote:  I apologize if I didn't answer you, but I think I tried, it didn't work

It actually appears in red when I type 120Hz

Or am I doing something wrong? In the "Detailed resolutions (2 slots remaining)" tab, correct?

I forgot to send the link

https://www.reddit.com/r/OLED_Gaming/com..._219_mode/
Read the first post. You need to use a DisplayID extension block. You definitely didn't add 120 Hz if you're asking this.

I have no idea how to do it, can you explain, please?
Find all posts by this user
Quote this message in a reply
11-26-2024, 01:45 AM
Post: #8620
RE: Custom Resolution Utility (CRU)
(11-26-2024 01:13 AM)willianwojcik Wrote:  I have no idea how to do it, can you explain, please?
Add an extension block and change the type to DisplayID 1.3. Then add a detailed resolutions data block and add 3840x1600 @ 120 Hz in there.
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 130 Guest(s)