Post Reply
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NVIDIA PATCHER, resolution over 400 MHz pixel clock is not showin up for selection
03-02-2018, 09:48 AM (This post was last modified: 03-02-2018 09:48 AM by jka.)
Post: #1
NVIDIA PATCHER, resolution over 400 MHz pixel clock is not showin up for selection
Heya,

Any detailed resolution that I add via CRU which exceeds 399.999MHz pixel clock is not visible for selection anywhere so I cannot use/activate it. I use CRU normally otherwise without issues. I did the "full" nvidia patch under normal Windows mode and restarted several times. Running these in this order:

1. reset-all.exe

2. restart64.exe

3. adding one detailed resolution with more than 400MHz (for example 420)

4. restart64.exe

did not help either.

Any ideas please?

Thank you very much!

My setup:

Windows 8.1 x64, gtx960, nvidia 372.70, large Trinitron CRT monitor over regular D-SUB analog, cheetos
Find all posts by this user
Quote this message in a reply
03-02-2018, 04:11 PM
Post: #2
RE: NVIDIA PATCHER, resolution over 400 MHz pixel clock is not showin up for selection
The NVIDIA patcher does not patch VGA/D-sub limits.
Find all posts by this user
Quote this message in a reply
03-02-2018, 06:03 PM
Post: #3
RE: NVIDIA PATCHER, resolution over 400 MHz pixel clock is not showin up for selection
I knew it! Was hard to believe this could be possible when I first stumbled upon it but wanted to be sure. Thank you very much for your reply.
Find all posts by this user
Quote this message in a reply
03-03-2018, 11:30 PM (This post was last modified: 03-03-2018 11:31 PM by jka.)
Post: #4
RE: NVIDIA PATCHER, resolution over 400 MHz pixel clock is not showin up for selection
And is the AMD/ATI patcher able to do it please?

Would the NVIDIA patcher work if I connected an adapter of sorts (sunix) between GPU DP and CRT?

http://www.sunix.com/product/DPU3000.html
Find all posts by this user
Quote this message in a reply
03-08-2018, 02:32 PM
Post: #5
RE: NVIDIA PATCHER, resolution over 400 MHz pixel clock is not showin up for selection
Yes, the AMD patcher is able to do it. You wouldn't need the patcher with a DisplayPort adapter. I don't know the limitations of that adapter.
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 1 Guest(s)